User manual RYOBI PH135R

[. . . ] this symbol indicates caution or warning. It may be used in conjunction with other symbols or icons. WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others. Always follow the safety instructions carefully to reduce the risk of fire, electric shock and personal injury. [. . . ] When not in use, the tool should be stored in a dry place which is high enough to be out of children's reach or under lock. nEVER TOUCH MOVING PARTS when the tool is operating. Never start a tool when one of its moving parts is in contact with the work place. ALWAYS PUT THE TOOL IN THE "OFF" POSITION before disconnecting it, to avoid accidental starting when you plug the tool back in. Refer to them frequently and use them to instruct others who may use this tool. If you lend this tool to someone, lend them these instructions as well. Due to Ryobi's ongoing product improvement policy, tool features and specifications are likely to change without notice. Length of Stroke Strokes per minute, no load Voltage Net weight s Before attempting to use your saw, familiarise yourself with all its operating features and safety requirements. It should be connected to a power supply that is 230 volts, 50 Hz, AC only (normal household current). Do not operate this tool on direct current (DC). a substantial voltage drop will cause a loss of power and overheating. Insert hex key into storage area when not in use. it is located on the base of your saw as shown in Figure 4. WARNING: Be careful not to insert the saw blade or hex key into the air vents. They could come in contact with electrically live internal parts, and cause electrical shock resulting in serious injury. WARNING: Your saw should never be connected to the power supply when you mount parts, make adjustments, install or remove blades, or when not in use. Your saw has a speed selector designed to allow operator control and adjustment of speed. The speed of your saw can be increased or decreased by rotating the speed selector in the direction of the arrows shown in Figure 3. S Note: Hold your saw in normal operating position and turn the speed selector clockwise to increase speed. If you want to lock the switch on a given speed, depress the trigger, push in and hold the lock-on button, and release the trigger. Next, adjust the speed selector until the desired speed is reached. WARNING: Failure to unplug your saw could result in accidental starting and cause serious injury. [. . . ] Most plastics are susceptible to damage from various types of commercially available solvents. They contain chemicals that can damage, weaken or destroy plastic. WARNING: Failure to unplug your saw could result in accidental starting and cause serious injury. Spread the tabs located on the rear of the attachment then remove the attachment from the base. [. . . ]