User manual RYOBI RD3318 VUE GLOBALE

[. . . ] The manufacturer cannot be held responsible for damage caused by incorrect installation or connection. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement is met. If there is any doubt, have the electrical system of the house checked by a qualified electrician. [. . . ] They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of an old appliance Old appliances may contain materials that can be recycled. Please contact your local recycling authority about the possibility of recycling these materials. Ensure that the appliance presents no danger to children while being stored for disposal. Before discarding an old appliance, unplug it from the outlet and cut off its power cord to prevent hazards. 9 Guide to the cooktop KM 443 Burners a Variable burner Touch controls e Variable burner selector f Extended burner selector g Left rear control and display h Right rear control and display i Right front control and display j Left front control and display k Control lock l Cooktop On/Off control bd Single burner c Extended burner 10 Guide to the cooktop Cooking zones Cooking zone Ø in inches front left a rear left b rear right c front right d 3 KM 443 Ø in cm 12 21 14. 5 17 17 x 26. 5 18 Rating in watts 750 2200 1200 1500 2400 1800 Total: 7600 4 3/ 4" 8 1/ 4" 5 3/ 4" 6 3/ 4" 6 /4 x 10 ½ 7 1/8 11 Use This cooktop is equipped with electronic touch controls activated by a light touch of the fingertip. If more than one control is pressed, the entries will be ignored. Keep the area around the touch controls clean at all times. Dirt or utensils placed on the controls may activate them. When cleaning the cooktop, make sure the cooktop is "Off", and be careful not to accidentally turn it "On". For this reason the pre-heat times are shorter. To Turn on "automatic pre-heat": ^ Turn on the cooktop by pressing the "s" touch control (l) until a dot lights up above it. A "­" will appear in the display. ^ Turn on the desired burner by pressing its "s" touch control. A "0" will appear in its display. A "9" will appear in the display. ^ Press the "&" control once. The automatic pre-heat feature is now selected. You now have 1 second to select the desired cooking temperature. If time elapses before a temperature is set, the "automatic pre-heat" feature will be canceled. ^ Use the "$" touch control to set the desired cooking temperature. Once the burner has stabilized at this temperature, the dot will disappear from the display. 15 Use Variable and extended burners Variable burner The left front burner of the cooktop is a variable burner. [. . . ] Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home. To learn more about MieleCare Extended Service Contracts, please contact your appliance dealer or visit us online at: www. store. miele. com Please paste the copy of the unit's data plate here. 21 22 Installation Instructions To prevent accidents and machine damage read these instructions before installation or use. Installation instructions Please read this section in its entirety before installing the cooktop. As a general rule there must be at least 30" (760 mm) between the top of the appliance and any object above it. If the manufacturer of said object recommends a different distance, follow that manufacturer's recommendation. To avoid damaging the cooktop, it should only be placed in the countertop after any exhaust hood or cabinetry have been installed above it. [. . . ]