User manual RYOBI RPW120B

[. . . ] It is essential that you read the instructions in this manual before operating this machine. It is essential that you read the instructions in this manual before operating this machine. INTENDED USE The cleaner is intended only for the cleaning of Vehicles, boats, buildings, etc, by the removal of stubborn dirt using clean water and chemical detergents. For domestic use only, not for professional use, and only for operation at temperatures above 0°C . [. . . ] Position the cord so that it will not get caught on lumber, tools, or other obstructions while you are working with a power tool. Failure to do so can result in serious personal injury. Never use the product with a damaged cord since touching the damaged area could cause electrical shock resulting in serious injury. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the task you are attempting. Before using this product, familiarize yourself with all operating features and safety rules. DETERGENT TANK Remove the cap from the detergent tank to add detergent to the pressure washer. HIGH PRESSURE TRIGGER Depressing this trigger allows you to dispense water at high pressure. HIGH PRESSURE TRIGGER LOCK-OUT The trigger lock-out prevents accidental use of the highpressure trigger. HYDROSURGE(TM) /LOW PRESSURE (HIGH FLOW) LEVER Use this lever when you want to rinse with water alone, or apply a combination of water and detergent at low pressure. oN/OFF SWITCH This switch turns the pressure washer on and off. TELESCOPIC HANDLE Lower the telescopic handle for convenient storage. GUN/LANCE The gun/lance features two outlets -- one for high pressure spray and one for low pressure (high flow) spray. Carefully cut the box down the sides then remove the Product and any accessories from the box. WARNING: This new product has been shipped in a partially assembled condition as described below. If in doubt, call Ryobi Customer Service for assistance. Operation of a product that may have been improperly preassembled could result in serious personal injury. Inspect the product carefully to make sure no breakage or damage occurred during shipping. Do not discard the packing material until you have Carefully inspected and satisfactorily operated the product. If any parts are damaged or missing, please call Ryobi Customer Service for assistance. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. [. . . ] All other parts should be replaced at an authorized service centre. POWER SUPPLY CORD REPLACEMENT If replacement of the power supply cord is necessary, this must be done by an authorized service centre in order to avoid a safety hazard. NOZZLE MAINTENANCE Excessive pump pressure (a pulsing sensation felt while squeezing the trigger) may be the result of a clogged or dirty nozzle. Turn off the pressure washer and shut off the water supply. [. . . ]