User manual RYOBI S-550

[. . . ] To ensure your safety and satisfaction, carefully read through this OWNER'S MANUAL and the SAFETY INSTRUCTIONS before using the product. 1, 2) It is necessary to remove the dust skirt before changing the abrasive paper. [. . . ] Never start a tool when its rotating component is in contact with the work piece. Never lay a tool down before its moving parts have come to a complete stop. ACCESSORIES : The use of accessories or attachments other than those recommended in this manual might present a hazard. Always start the sander before applying it to the workpiece. Move the sander evenly over the entire area. The weight of the sander alone is sufficient for normal use. Any excess pressure will retard the sanding action, leave an uneven finish and cause extra wear to both the tool and the abrasive paper. Never operate the sander in one place for too long or excessive material will be removed. Always lift the sander off the workpiece before turning it off. The sander should never be turned off while resting on the workpiece or when removing material. Do not use the sander without abrasive paper or the rubber pad will be damaged. Never use water on the sanding pad and do not use the sander on wet surfaces. [. . . ] EN60745, EN55014, EN61000 in accordance with the regulations 98/37/EC and 89/336/EEC Sound pressure level 76 dB(A) Sound power level 87 dB(A) The weighted root mean square acceleration value less than 2. Machine : ORBITAL SANDER Type : S-550 Representative name of company : RYOBI LIMITED address : HEAD OFFICE 762 MESAKI-CHO, FUCHU-SHI HIROSHIMA 726-8628, JAPAN telephone number : (0847)41-1273 name/title : Yukimasa Takenaka General Manager Power Equipment Division [. . . ]