User manual RYOBI TURF-POWER-LE720TP

[. . . ] It is safer than using your hand and it frees both hands to operate the tool. Keep cutting tools sharp and clean for better and safer performance. Keep handles dry, clean and free from oil and grease. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. [. . . ] Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may create a risk of injury when used on another tool. When servicing a tool, use only identical replacement parts. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury. have your tool repaired by a qualified person. This tool is in accordance with the relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user. Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. VARIABLE SPEED This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. The switch trigger can be locked in the OFF position. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector (Forward/Reverse Selector) in center position. This tool has the feature of being reversible. the direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. the drilling direction is reversed when the selector is to the right of the switch. When the selector is in center position, the switch trigger is locked. To stop, release switch trigger and allow the chuck to come to a complete stop. eLECTRIC BRAKE This drill has an electric brake. [. . . ] Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. WARNING Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. They contain chemicals that can damage, weaken or destroy plastic. [. . . ]