User manual SAECO D.A. 3P

[. . . ] Automatic drink vending machine model Saeco D. A. 3P / 5P Espresso Italia PTY LTD www. espressoitalia. com. au Freecall 1300 660 976 INSTRUCTION AND MAINTENANCE MANUAL English MAIN PARTS 1 2 3 4 6 7 8 9 5 27 26 30 25 24 23 22 12 13 14 28 10 11 29 fig. 1 21 20 19 18 17 16 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 2 Display Fault light Keys (D. A. 5P) Coin slot Silicon bushing (only D. A. 5P) Soluble product container (solo D. A. [. . . ] RESET STOP This function allows the zeroing of all the product quantity partial counters. Press "ENTER" to access this option. RESET STOP ->Y<N To set this function follow the procedure described in chapter "7. 5 Changing and saving parameters": Confirming the letter "->Y<-" zeroes the counters. TEMPERATURE T:095 This function allows setting the temperature maintained by the device for a few minutes (about 4) after a drink has been dispensed. The lower line of the display shows the set value, expressed in degrees centigrade. To set the minimum maintained temperature follow the procedure described in chapter "7. 5 Changing and saving parameters". TEMPERATURE T:100 This function allows the setting of the temperature reached by the device after a certain period of inactivity (about 4 minutes) to compensate the natural temperature fall. The lower line of the display shows the set value, expressed in degrees centigrade. To set the inactivity temperature follow the procedure described in chapter "7. 5 Changing and saving parameters". COUNTER BEVERAGE This function allows, only if the mechanic pulse counter is fitted, to enable or not the total or partial counting of drink vends. To obtain drink vend total count enable the "MECH. To obtain drink vend total count enable the "MECH. COUNTER SOLUBLE" functions (only D. A. To select the count to be enabled follow the procedure described in chapter "7. 5 Changing and saving parameters". CLOCK *09:33 L 05 MAR 97* This function allows the setting of the current hour, minute, day, month and year. To set the function follow the procedure described in chapter "7. 5 Changing and saving parameters". Repeat the same procedure for all function data. 5PN SAECO* This function allows the setting of the text that scrolls on the display when the vending machine is on standby. To set the text follow the procedure described in chapter "7. 5 Changing and saving parameters". TEXT DISPENSING DISPENSING This function allows the setting of the text that scrolls on the display when the vending machine is dispensing a drink. To set the text follow the procedure described in chapter "7. 5 Changing and saving parameters". TEXT OUT OF SERV OUT OF SERVICE This function allows the setting of the text that scrolls on the display when the vending machine stops due to a fault. To set the text follow the procedure described in chapter "7. 5 Changing and saving parameters". [. . . ] 32 Water tank The water tank should be emptied and cleaned every time it is filled. Dispensing slot area Unfit the dispensing slot by simply extracting it from its seat. Separate it from the grill, the tray and the drip tray and wash everything with lukewarm water (fig. Important The manufacture disclaims all responsibilities for possible malfunctioning caused by improper or scarce maintenance. 11 - VARIATIONS 11. 1 Model D. A. [. . . ]