User manual SAECO D.A. CRISTALLO 400

[. . . ] Vending Machine D. A. CRISTALLO 400 Type: D. A. FS 400 WARNING: This instruction manual is intended exclusively for specialized personnel. Espresso Italia PTY LTD www. espressoitalia. com. au Freecall 1300 660 976 USE AND MAINTENANCE English MAIN PARTS 2 3 9 4 5 6 1 7 8 10 Fig. 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 2 Door lock Display Product keypad Coin slot Change return key Instruction plate Dispensing outlet door (beverage/cup dispensing) Change removal outlet Power cord socket Water connection coupling Safety switch Air break device Container 1/2 (instant products) Container 3/4 (instant products) Coffee bean hopper Coffee grinder Mixer Instants opening 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Spiral mixer Brew group Drip Tray Dispensing arm Coffee ground channel Fluid discharge tank Collecting tray Door open alarm switch CPU card Cup dispenser Stirrer dispenser Sugar container Change-giving coiner support Dispensing outlet Coin return duct Coin box set Sugar opening Chute Espresso Italia PTY LTD www. espressoitalia. com. au Freecall 1300 660 976 English 11 12 13 14 26 27 28 29 15 16 17 18 31 19 20 21 22 23 32 30 24 25 33 34 Fig. 1 35 36 Espresso Italia PTY LTD www. espressoitalia. com. au3 Freecall 1300 660 976 English CONTENTS MAIN PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Important The cup counter is updated for any single cup dispensed for whatever reason. Preselection key ("CM") The functions associated with the preselection key can be selected from the following: A. Disabled A - Preselection: by pressing this key the vending machine displays the preselection message ("PRESELECTION" by default) and makes another group of beverages available (from 15 to 26), extending the beverages (or recipes) that the vending machine can dispense to a total of 26. Example: by pressing the "PRESELECTION KEY" followed by "beverage 02", the vending machine will dispense beverage/recipe 16 instead of beverage 02. Important With this configuration it is necessary to set the new beverage/recipe group available (see the BEVERAGE BREWING menu). B -Beverage 14: by pressing this key the beverage/recipe 14 will be brewed. C -Disabled: pressing the key has no effect. Dispensing outlet microswitch It enables/disables checking if the dispensing outlet door has been opened (7 - Fig. By setting YES (default value), the dispenser will check, after each brewing, that the dispensing outlet door has been opened, before allowing another beverage to be dispensed. By setting NO, no check will be performed. Important The VM operates with the dispensing outlet door always open if: 1- "DISPENSING OUTLET MICRO" is set to NO 2- the dispensing outlet microswitch is short-circuited PRESELECTION KEY BEVERAGE 13 PRESELECTION KEY >PRESELECTION< PRESELECTION KEY >DISABLE< CONTINUES PRESELECTION KEY >BEVERAGE 13< DISP. OUTLET MICRO >Y< N - Cup key ("CM") The functions associated with the cup key can be selected from the following: A. Disabled A - Preselection: if this option is enabled, a beverage without cup can be obtained by pressing the CUP key before choosing a beverage. After the preselection key is pressed, the user has 8 seconds to select the desired product. After 8 seconds, the preselection is cancelled. Price Setting - Cup price can be set only if cup preselection is activated. To set, go to PROGRAMMING - CUP PRICE in the PRICE MANAGEMENT menu. Counters and Statistics - If cup preselection is activated, the VM will calculate the cost of the product based on two components: beverage + cup; the operator will therefore have to set the price of both components. The amount paid by the user for each product with cup is given by the sum of the beverage price plus the cup price. If: price level 1 = 0. 50 and price level 2 = 0. 05 Beverage Price Beverage with cup Beverage without cup Level 1 Level 1 Cup Price Level 2 Level 2 Final Cost 0. 55 0. 50 Increased Counters Beverage counter and cup counter Beverage counter Beverage counter - If the product is dispensed with the cup, the following will be added to statistics: 1 stroke for the beverage at price level 1 (0. 50), 1 price increase on cup price (0. 05) and 1 cup dispensing. Whereas if the product is dispensed without the cup, the following will be added to statistics: 1 stroke for the beverage at price level 1 (0. 50) and 1 cup dispensed. The total amount of cup mark-ups is displayed in MAINTENANCE under CUP in the STATISTICS menu. 28 Espresso Italia PTY LTD www. espressoitalia. com. au Freecall 1300 660 976 English LANGUAGE * ITALIANO * SERIAL CONNECTION * EVA-DTS * LANGUAGE >ITALIANO< SERIAL CONNECTION EVA-DTS SERIAL CONNECTION SAECO PROTOCOL SERIAL CONNECTION GSM MODEM CA3 = Total value of coins + banknotes since reset, Value of banknotes collected since reset CA4 = Value of change given since reset CA8 = Overpay value since reset CA14 = Banknote value, number of banknotes collected since reset Note: CA14 is entered for each banknote DA2 = number of sales by card since initialisation, value of sales by card since reset, number of sales by card since reset, total sold in cups DA3 = CARD IN since reset, discounts/increases DA4 = CARD OUT since reset, value of card increases since reset DA5 = value of card discounts since reset Please see relevant accessory instructions for further details. CONTINUES PASSWORD CHANGE COMPLETE MENU NO PASSWORD CHANGE >00000< COMPLETE MENU Y >N< - Language ("CM") Enables selection of the language to be used by the vending machine. [. . . ] If this is the case, the following message is displayed: PRESS P1 TO UPDATE FROM VX. yz > TO A. bc - External FLASH or EEPROM memory The procedure is as follows: turn off the vending machine; remove the guard; remove the TIMEKEEPER (if any); insert the external memory on the 16x2 strip (Fig. 93) with PIN 1 notch turned towards the right; Make sure all the memory pins are fully inserted, so that they fit the 16x2 strip perfectly. 16x2 strip for SW upgrading - the message on the second line indicates that if the program update is carried out, the current version (X. yz) will be replaced by the version in the flash memory (A. bc); to proceed with software upgrade the internal P1 key (Fig. 93) of the CPU card must be pressed; any other key will abort the operation; the software updating requires about 30 seconds and the end of the procedure is indicated by a message on the display; UPDATE COMPLETED turn off the vending machine; remove the external memory; put the TIMEKEEPER back in place if necessary; replace the guard. P1 Fig. [. . . ]