User manual SAECO TALEA TOUCH PLUS MANUAL 2

[. . . ] Operation and maintenance manual Before using the machine, please read the attached operating instructions. Carefully read the safety rules. FOR HOUSEHOLD USE ONLY IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. To protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid. Close supervision is necessary when the appliance is used by or near children. [. . . ] main menu beverage settings (see page 23) time/date settings (see page 24): - current date and time; - stand-by timer; - Switch on/off (stand-by) times over a day. main menu machine settings (see page 21) maintenance settings (see page 26) exit It allows displaying texts if there are associated icons, and switch menu mode from icons to text. reset factory settings (see page 29) previous page After having set each of the following menus, press - exit to return to the previous screen WITHOUT saving the new settings; to save; to return to the main menu WITHOUT saving the new settings. 21 MACHINE SETTINGS To change the machine operation settings, press "machine settings" on the main menu. This function allows you to set the menu language and the display contrast. language English language & display Change the display language. contrast 10 / 15 Adjust the contrast of the display. alerts and acoustic settings This function activates/deactivates the acoustic tones. machine ready on Activate/deactivate a tone every time the machine is ready. key tone on Activate/deactivate a tone every time an icon is pressed. cup-warming surface This function allows you to control the cup warming surface. always on Cup warming surface is always on when the machine is not in stand-by mode. Cup warming surface is always off. always off 22 PROGRAMMING THE MACHINE MACHINE SETTINGS water settings This function allows you to set various water settings. rinse on Activate/deactivate the rinse function to briefly clean the internal circuits of the machine. This function is activated by default by the manufacturer. Note: the rinse cycle is performed every time the machine is started up, after the warming phase. water filter off Activate/deactivate the warning to replace the water filter. Important note. This setting automatically adjusts the parameters which allow the user to perform correct machine maintenance. Select "on": only when the water filter is installed in the water tank as shown on page 7. This function is automatically activated after selecting "reload water filter". Select "off": when there is no water filter in the water tank. Select "reload water filter" : when a new water filter is installed in the water tank. NOTE: if the water filter is not available, insert the small white filter previously removed (see step 1 - page 7) into the tank. water hardness 3/4 Adjust the machine's water hardness setting. This will allow the machine to request descaling at the right time. Measure the water hardness as shown on page 6. 23 BEVERAGE SETTINGS This menu allows you to adjust the general brew parameters of the various types of coffee. Press "beverage settings" on the main menu. espresso coffee Select a beverage to adjust the specific functions and settings. long coffee prebrewing strong Prebrewing slightly dampens the coffee grounds before brewing so as to bring out the full aroma of the coffee and enhance the flavor. Strong: prebrewing is longer in order to bring out the full coffee taste. Temperature for brewing coffee. temperature medium aroma medium Aroma adjusts the quantity of coffee to be ground, or sets the use of pre-ground coffee. With this function, you can customize the coffee dose for each beverage to suite your taste. You can also choose to brew decaffeinated coffee using the pre-ground function (see page 8). coffee volume The coffee volume (water quantity) to be used for preparing coffee. Note: adjust the quantity according to the cups you will use. The current setting is shown next to each function. 24 PROGRAMMING THE MACHINE TIME/DATE SETTINGS In this menu, you can set the current time, the stand-by timer and the energy saving function. Press "time/date settings" from the main menu. set clock Set all the parameters concerning the current time. current time 08:00 Set the current time on the machine (displayed on the main screen). time format 24 hr Set the time format. The machine can also display the time in American format (am/pm). date settings Set all the parameters concerning the calendar. [. . . ] Danger of burns! CLEANING / DESCALING · For cleaning the milk and coffee circuits use only recommended detergents provided with the machine. These detergents must not be used for other purposes. · Before cleaning the machine, the main switch must be turned to OFF (0), unplugged from the socket and cooled down. · Keep the appliance from coming into contact with splashes of water or immersing in water. [. . . ]