User manual SAECO XELSIS SUPREMA

[. . . ] Removing and inserting the brew group _____________________________________________________ 12 A1 Lid of bean hopper A2 Lid of pre-ground coffee compartment A3 Cup tray A4 Control panel A5 Socket for cord A6 Main switch A7 Drip tray A8 Drip tray release grip A9 HygieSteam container A10 HygieSteam cover with milk tube holder A11 Height-adjustable coffee and milk dispensing spout A12 Internal cappuccinatore A13 Power cord with plug A14 Grind setting knob (to learn more, visit www. Com/care) A15 Bean hopper A16 Service door A17 Coffee funnel A18 Coffee residues drawer A19 Brew group (to learn more, visit www. There are two versions of this espresso machine. Their control panels look different, but all icons work the same way. [. . . ] 6 To place back the internal cappuccinatore, put it in upright position and make sure the holes are aligned With the two tubes on the machine. Then move the internal cappuccinatore upwards until it locks into place (Fig. Under no circumstances should you use a descaler based on sulfuric acid, hydrochloric acid, sulfamic or acetic acid (vinegar) as this may damage the water circuit in your machine and will not dissolve the limescale properly. Not using the Philips descaler will void your warranty. Failure to descale the appliance will also void your warranty. You can buy Philips descaler from your local or online retailer or from authorized service centers. 1 When the machine asks you to descale it, tap the confirmation icon to start. To start descaling without being prompted by the machine, tap the 'Status' icon and select 'Descale'. 2 Remove the drip tray, the coffee grounds container and the HygieSteam container (Fig. 26), empty them and put them back into place. 4 Pour the whole bottle of Philips descaler into the water tank and then fill it with water up to the CALC Then place the water tank back into the machine. 6 Make sure that the HygieSteam container is correctly assembled (Fig. Place the milk tube in the milk tube holder. 7 Follow the instructions on the screen to start the descaling procedure. 8 Once the descaling cycle is finished, you need to rinse the water tank and water circuit. 9 Place a new AquaClean filter in the water tank and activate it (see 'Activating the AquaClean water filter Tip: Using the AquaClean filter reduces the need for descaling!What to do if the descaling procedure is interrupted You can exit the descaling procedure by pressing the on/off icon on the control panel. If the descaling procedure is interrupted before it is completely finished, some descaling liquid may remain in the water tank or the water circuit. In that case, do the following: 1 Empty and rinse the water tank thoroughly. 2 Fill the water tank with fresh water up to the CALC CLEAN level indication and switch the machine back on. The machine will heat up and perform an automatic rinsing cycle. Dispense half a water tank of hot water and then brew 2 cups of pre-ground coffee without adding ground coffee. [. . . ] Kafijas biezumu tvertne ir prpildta, bet ikona "Empty coffee grounds container" (Iztuksojiet kafijas biezumu tvertni) nepardjs uz displeja. Is skirting rsi pieno gaunamas skirtingas put tris ir skirtinga put kokyb. A1 Lokk på bønnetrakten A2 Lokk på kammeret for forhåndsmalt kaffe A3 Koppebrett A4 Kontrollpanel A5 Kontakt for ledning A6 Hovedbryter A7 Dryppebrett A8 Utløsergrep for dryppebrett A9 HygieSteam beholder A10 HygieSteam deksel med melkerørholder A11 Høydejusterbar kaffe- og melketut A12 Integrert, automatisk melkeskummer A13 Strømledning med kontakt Les det separate sikkerhetsheftet nøye før du bruker maskinen for første gang, og ta vare på det for senere referanse. Med Saeco-maskinen for helautomatisk kaffe kan du koble til med Wi-Fi-nettverket for å forbedre kaffeopplevelsen. [. . . ]