User manual SAGE MOULIN THE SMART GRINDER PRO

[. . . ] Do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted. Do not leave the appliance unattended when in use. Always ensure the appliance is turned OFF, unplugged at the power outlet and has been Allowed to cool before cleaning, attempting to move or storing. Always turn the appliance to the OFF position, switch off at the power outlet and unplug at the power outlet when the appliance is not in use. [. . . ] Align tabs on the base of the bean hopper and insert hopper into position. Turn the bean hopper dial 90° to lock into position. Fill with fresh coffee beans and secure lid on top of bean hopper. Use single wall filter baskets when grinding fresh coffee beans. Use the finer 1­30 settings in the ESPRESSO range. Insert your portafilter into the cradle. Maximum number of shots with the cradle inserted is 2. Selecting your SHOTS / CUPS Select the desired amount of ground coffee required by pressing the SHOTS / CUPS button. If the Grind Size Dial is tight, run the grinder by pressing the START / PAUSE / CANCEL button while turning the Grind Size Dial. This will release coffee grounds caught between the burrs. Remove cradle by sliding out from under the grind outlet. Rotate the Grind Amount Dial to adjust the grinding time to achieve the correct amount of coffee. Slide in grinds container with cap open or coffee filter directly under grind outlet. Select your grind size For espresso, we recommend selecting Grind Size setting 12 as a starting point and moving the Grind Size dial Coarser or Finer to adjust the flow of espresso as required. Select the required amount of ground coffee by pressing the SHOTS / CUPS button. Programming a custom grind amount/time only sets it for that particular brew method. This will not change the other Shots or Cups settings. pause Function You can pause the grinder during operation allowing you to collapse or settle the coffee in the portafilter. Press and release the START / PAUSE / CANCEL button to start the grinding operation. During grinding, press the START / PAUSE / CANCEL button again to pause the operation for 10 seconds. Press again within this time to resume grinding the remaining dose. Press and release either the START / PAUSE / CANCEL button or push the handle of your portafilter once. [. . . ] Re-lock hopper into position & try again. Use Grind Amount Dial to fine tune the amount `more' or `less'. It is normal for the correct amount of coffee to appear overfilled in your portafilter. Untamped coffee has approximately three times the volume of tamped coffee. [. . . ]