User manual SAGEM D27T

[. . . ] Dear customer: Thank you for purchasing a DECT SAGEMCOM telephone we appreciate your trust in us. This product was manufactured with the utmost care, should you encounter difficulties during its use. We recommend that you refer to this user guide. You can also find information on the following site: For your comfort and safety, we ask that you read the following paragraph carefully: Your DECT telephone must not be installed in a humid room (wash-up room, bathroom, laundry room, kitchen, etc. [. . . ] To recover to normal, press and hold key 1 sec or replace handset into the base cradle. Press menu, select "clock&alarm " using the or key, Press menu. Using the or key, select "date/time ". - To change it, enter the new date in YY/MM/DD format. - To change it, enter the new time in the HH:MM format. (If, after entering the time, the time format is 12H, use the key to set pM). Press menu, select "clock&alarm " using the or key, Press menu. Using the or key, select "set format ". Using the or key, select "time format ". Press menu key to confirm your selection. This function allows you to define the date format (JJ/MM ou MM/JJ). Press menu, select "clock&alarm " using the or key, Press menu. Using the or key, select "set format ". Using the or key, select "date format ". Press menu key to confirm your selection. Press menu, select "clock&alarm " using the or key, Press menu. Using the or key, select "alarm ". To activate the alarm once, select "on once ". To repeat the alarm each day at the programmed time, select "on daily ". Select your choice then press menu: Use the touch tone pad to enter the current alarm time. Key to (If, after entering the time, the time format is 12H, use the key to set aM and the set pM). Press menu key to confirm your selection. [. . . ] B) Exclusions From Guarantee SAGEMCOM shall have no liability under the guarantee in respect of: Damage, defects, breakdown or malfunction due to one or more of the following: o Failure to properly follow the installation process and instructions for use o An external cause to the equipment (including but not limited to: lightening, fire, shock, vandalism, inappropriate conditions of electrical network or water damage of any nature) o Modifications made without the written approval of SAGEMCOM o Unsuitable operating conditions, particularly of temperature and humidity o Repair or maintenance of the equipment by persons not authorised by SAGEMCOM Wear and tear from normal daily use of the equipment and its accessories Damage due to insufficient or bad packaging of equipment when returned to SAGEMCOM Usage of new versions of software without the previous approval of SAGEMCOM Work on any equipment or software modified or added without the prior written consent of SAGEMCOM Malfunctions not resulting from the Equipment or from software installed in user workstations for the purpose of use of the equipment. Communication problems related to an unsuitable environment including: o Problems related to access and/or connection to the Internet such as interruptions by access networks or malfunction of the line used by the subscriber or his correspondent o Transmission faults (for example poor geographical coverage by radio and TV transmitters, interference or poor line quality) o Local network faults (wiring, servers, workstations) or the failure of the transmission network (such as but not limited to interferences, fault or poor quality of the network) o Modification of the parameters of the cellular or broadcast network carried out after the sale of the Product Normal servicing (as defined in the user guide supplied with the equipment) as well as malfunctioning due to servicing not being carried out. Servicing costs are in any event always borne by the customer. Malfunctions resulting from the usage of products, consumables or accessories not compatible with the equipment. [. . . ]