User manual SAGEM D86C

[. . . ] LU 252976139A D86C EN. book Page 1 Vendredi, 3. août 2007 9:56 09 User Guide Préliminaire. fm Page i Lundi, 3. septembre 2007 11:57 11 INTRODUCTION Dear customer: Thank you for purchasing a SAGEM DECT telephone; we appreciate your trust in us. This product was manufactured with the upmost care, should you encounter any difficulties during its use, we recommend that you refer to this user guide. [. . . ] - Press soft key " OK " on the handset 1, the "Handset 2" that had registered same base will be highlighted will appear on the display. - Press soft key "OK" on the handset 1, the "PB Trans To Handset 2" will appear on the handset 1 display, the "PB Trans From Handset 1" will appear on the handset 2 display. - Press soft key "Accept" on the handset 2 to receive all entries from handset 1 Phonebook. - Press soft key "Abort" on the handset 1 or "Reject" on the handset 2 to cancel Phonebook transferring. Quick dial Press the soft key " " in the standby mode to enter Phonebook. Key-in the 1st character or press the Up or Down button to find an entry you want. Press soft key "Option" to select "Quick Dial". Press soft key "OK" to enter a number (1~9). Press soft key "OK" to confirm. Press and hold the digit key (1~9) to find the quick dial number. Press Talk or Speaker On/Off key to make quick dialing. Make a call from phonebook - Press the soft key " " during the standby mode to enter Phonebook. - Key-in the 1st character or press the Up or Down button to find an entry you want, the name and number will appear on the display alternately. - Press the Talk button. 20 LU 252976139A D86C EN. book Page 21 Vendredi, 3. août 2007 9:56 09 DISPLAY Wallpaper setting This menu allows is for changing the your handset idle screen picture. Press OK to keep this image as the background display or use the navigation (up/down) button to select a different one. Contrast setting Press Menu to select Display. Press OK to select contrast level(1, 2, 3). Press OK to confirm and save. 21 LU 252976139A D86C EN. book Page 22 Vendredi, 3. août 2007 9:56 09 ALARM/CLOCK Clock Setting The base manages the time displayed on the handset, so the time indicated on your handset should be re-verified after any loss of electric power. If the time is not set correctly, proceed as indicated above to set the time. - Press Navigation (up/down/left/right) button to select Alarm/Clock. A screen displays the current date and time. - Press OK to set the time/day (hh:mm DD-MM-YY). - Press OK to confirm and save. Alarm Setting The alarm function enables you to activate the handset ringer every day at a set time. [. . . ] Operating environment: - Charge : 0°C to +45°C - Discharge : -20°C to +60°C - Storage environment : -20°C to +45°C 34 LU 252976139A D86C EN. book Page 35 Vendredi, 3. août 2007 9:56 09 WARRANTY Product Warranty Sagem Guarantees your product for 12 months from date of purchase against any defect in materials or workmanship under conditions of normal use and service and subject to proof of the date of purchase being provided and subject to the conditions specified below. The benefits conferred by this warranty are in addition to all other rights and remedies in respect of the product that the consumer has under the Trade Practices Act and similar State and Territory laws. Warranty Service Conditions Subject to your statutory rights referred to above, Sagem expressly limits its liability with respect to its products to the person who purchases the Product from the Sagem authorised retailer. Subject to your statutory rights referred to above, Sagem expressly limits its liability with respect to its products to whichever is the lowest amount out of: A. [. . . ]