User manual SAGEM DTR94 HD DATASHEET

[. . . ] FREESAT+ HD DIGITAL TV RECORDER DTR94 HD Freesat USER MANUAL ENGLISH CONGRATULATIONS! This Recorder is a new generation of Sagem Communications SAS (here after referred to as Sagem Communications) recorder dedicated to Digital Satellite Television and equipped with a hard disk. With this technological advantage, you can make digital audio/video recordings. Once you have connected your recorder and performed the initial installation, you will be able to watch and enjoy freesat HD and SD channels. You can update your recorder if new functions or services become available. [. . . ] Skip: By default; the and keys are set to skip 1 minute backward and forward when pressed during a video playback. You can change this setting to your convenience, and independently decrease or increase each action. 6-3 MANAGING CHANNELS AND FAVOURITE LISTS To access the channels settings screen, press . Once you are in the main menu, select CHANNELS. 6-3-1 Managing Channels In CHANNELS, select MANAGE CHANNELS. By default, all TV channels and radio stations found during the recorder installation are saved and available. You can however hide the unwanted channels, or lock access to specific channels. Each time you switch to a locked channel, you will be asked to enter your parental code. Use the navigation arrows to browse the channel list. To hide / unhide a channel, highlight it and press the red key on the remote control. Hidden channels appear with the mention 'Hidden'. To lock / unlock access to a channel, highlight it and press the green key. Locked channels appear with a 'key' symbol. - 17 - 6-3-2 Creating Favourite lists In CHANNELS, select FAVOURITE LISTS. To create a favourite list, press the yellow key to select an empty list (list A to D). Highlight a channel in the Main channels list and press the green key to add it into your favourite list. To remove a channel from the favourite list, use the red key. To save your favourite list, press . To edit or empty a list of favourite channels, use the yellow key to select it and carry out the desired modifications. 6-4 RECORDER SETTINGS To access the recorder settings screen, press SETTINGS. Once in the main menu, select RECORDER If the installation lock is activated, enter your parental code (to change your parental code, see "Changing your Parental code", page 16). 6-4-1 Searching for channels In RECORDER SETTINGS, select CHANNEL SEARCH. Enter your full postcode (without space) and press . Make sure you enter a valid postcode, otherwise you will not be able to launch a channel search. Press again to launch the channel search. A bar shows you the search progress. - 18 - Once the search is complete, press channel list. to save the The Channel search function installs all available freesat HD and SD channels. If you want to install non freesat channels, please refer to "Adding Non freesat channels", page 22. 6-4-2 Picture settings In RECORDER SETTINGS, select PICTURE. TV Screen Size: select the display mode for your TV: 16:9 (widescreen TV) or 4:3 (Traditional TV). Resizing on 4:3 TV: if your display mode is 4:3, select the desired resizing mode: Centre Cut Out or 16:9 Letterbox. [. . . ] You must therefore connect the 2 satellite tuners (see key. "Connection to the satellite dish", page 8). - 36 - A black screen (no video) appears at the end of a Some channels stop their broadcast with a fixed image or no recording. When a recording ends on such programmes, the video recording stops but the time counter continues until the end of the scheduled recording time. Make sure that you set your manual recordings with the correct end time. [. . . ]