User manual SAGEM FLP 3000-X

[. . . ] FLP 3000-X LCD Projector User's Manual SAGEM SA - Siège social : Le ponant de Paris - 27, rue Leblanc ­ 75512 PARIS CEDEX 15 - FRANCE Société anonyme à directoire et conseil de surveillance au capital de · 33 300 000 ­ 562 082 909 R. C. S. All rights reserved Reproduction is any manner whatsoever without the written permission of SAGEM SA is strictly forbidden. Informations in this document is subject to change without notice. Trademarks used in this user-guide: SAGEM and the SAGEM logo are trademarks of SAGEM SA ; Apple, Macintosh and PowerBook logo are trademarks of Apple Computer, Inc. [. . . ] Freeze --- Freezing animated images A still image is displayed. Press the button again to restore the image. Volume --- Adjusting the volume of the projector's speaker Press VOLUME +/- (remote control) or (control panel) to adjust volume. Zoom --- Enlarging the projected image Use ZOOM +/- to change the enlargement ratio. Press the POWER button twice to turn off the power. To prevent mis-operation, a confirmation message appears when POWER is pressed once. The power turns off when you press the button once more. The lamp will turn off and the cooling fan will keep running. The POWER indicator will flash GREEN for 60 sec. 2. Wait until the POWER indicator lights RED steadily (until the cooling fan stops). Be careful not to cut power to the projector while the cooling fan is still running. 3. Use to select a main menu item, and then press to enter the selected sub-menu. Use to select a sub-menu item, and then press to enter an individual adjustment screen or the next menu level. Use to adjust the setting, and to select an item. Input Source YCbCr Main Menu Item IMAGE BRIGHTNESS CONTRAST SHARPNESS POSITION SATURATION TINT 63 61 50 H. Press MENU to return to the previous screen. Press to return to the previous menu level. Main Menu Back Select Next/Execute Sub-Menu 6. To close the menu, press ESC. List of Functions IMAGE Sub-menu BRIGHTNESS CONTRAST SHARPNESS POSITION SATURATION TINT PHASE Function Adjust the image brightness. Adjust the difference between light and shade in the image. Move the image display position vertically and horizontally. Adjust the color intensity for the image. Adjust clock phase if any banding noise. 12 SETTING Sub-menu FREEZE SOURCE PIP MODE Function Freeze animated image. Display the images in the Picture-in-Picture mode. * PIP SIZE: Open or close the sub-screen and select its size. * PIP SOURCE: Select the input source of the sub-screen. [. . . ] User can clean or replace the air filter by following the steps below. Power off the projector and disconnect the power cable. Turn the unit bottom up and open the filter cover. Remove the air filter, and use a vacuum cleaner to clean away the dust, or replace a new one directly. [. . . ]