User manual SAGEM HILONC 3GPS DATASHEET

[. . . ] HILONC-3GPS TECHNICAL SPECIFICATION ~ Freedom of speech for smart machines ~ FICHE RECAPITULATIVE / SUMMARY SHEET Ed. 1 1. 02 1. 05 Date Date 2011-10-20 2011-07-12 2011-10-20 Référence Reference URD1­ OTL 5696. 3/ 72497 Pages modifiées / Changed pages Observations Comments Création du document / Document creation HiLoNC-3GPS Size and Pad Out modified Page 9 Pages 16 and 17 Page 18 Page 20 Pages 26, 27 and 30 Page 31 Page 35 Page 36 Page 37 Page 38 Pages39 and 40 Pages47 and 48 Product specification overview eCall specification GPS specification PCM clock is fixed to 2. 048 MHz UART speed UART pinout clarification VBAT voltage PWM SPI defintion SDIO Digital audio GPS sensitivity Packaging, MSL and underfill US version added Power consumption values Tolerances have been added in the mechanical drawing 1. 08 2011-12-09 Page 4, 9 Page 22 Page 44 Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 -page 2/49 SOMMAIRE / CONTENTS 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. 1 PRODUCT CONCEPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. 2 STANDARDS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. 3 TERMS AND ABBREVIATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 1. 4 CONVENTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1. 5 PRODUCT FEATURES OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2. HILONC-3GPS BLOCK DIAGRAM & PINOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3. [. . . ] Signal VBACKUP Pin N° 28 Description Power supply for backup battery 3. 12 VGPIO This Voltage pin is the reference voltage for the internal digital I/O's and it can be used as a power supply and also as a module power status (ON/OFF). VGPIO is high when the module starts and remains at this level until the module is OFF. Signal VGPIO Pin N° 71 Description Digital Power supply and power up status 3. 13 POWER SUPPLIES Connecting all power supply pins, 3for the VBAT and 49for the GND, is recommendedto lower power signal path serial resistance. Signal VBAT GND Pin N° 29, 43, 44 1, 2, 3, 5, 6, 7, 8, 10, 12 , 4556, 89116 Description VBAT power input pins Pin28/29 are for RF power Pin39/40 are for Baseband power Ground pins Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 20/49 3. 14 POWER MANAGEMENT 3. 15 SLEEP MODES There are two kinds of sleep modes, the "off mode" and "stand-by" mode as described below: 3. 15. 1 Off mode When the module is in the off mode it cannot receive any calls or receive any AT commands but can be awakenedby using PWON signal [3]. 3. 15. 2 Stand-by Mode Management There are three stand-by mode management controls: · AT+KSLEEP=0 In this mode the sleep state is controlled by the host DTR and by the firmware: - DTR = 1 - The module never enters into the sleep mode - DTR = 0 - The module enters the sleep mode when it is ready and cannot be awakened with an AT command. To wake up the module the user must toggle DTR to 1. Remarks: Even in this mode it is possible to use DTR signals to go from the data mode to the command mode. However, in this case, DTR has to be toggled from 1 to 0 then from 0 to 1. · AT+KSLEEP=1 In this mode the sleep mode state is only controlled by the firmware. The module enters the sleep mode when it is ready. The module may be awakened with any character received on the UART. However, to be sure to awaken the module, the "0x00" character must be sent. The main interest of the AT+KSLEEP=0 mode is to be able to forbid the sleep mode from using the DTR signal. · AT+KSLEEP=2 In this mode the sleep state is never authorized in any DTR state. Detailed descriptions of these modes are given in [4]. Here we give the logical state. '1' means connected to the ground. HiLoNC-3GPS technical specifications 2011-10-20 - page 21/49 Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 3. 15. 3 Powerconsumption The power supply input of VBAT ranges from 3. 4V to 4. 2V and 3. 7V is nominal. All measurements in the communication mode are done at the maximum RF power transmission (PCL max). Off mode Stand-by mode Paging rate 2 ­ connected to the network Stand-by mode Paging rate 5 ­ connected to the network Stand-by mode Paging rate 9 ­ connected to the network GSM900 / CSD mode ­ in GSM850(PCL=5) communication DCS / PCS(PCL=0) GPRS when transmitting GSM900 / GSM850 data (CS-4 Class 10 4DL, DCS / PCS 1UL) EDGE when transmitting data (MCS-9, Class 10, 4DL, 1UL) GPRS stand-by mode ­ 1 or 2 PDP context are open Current consumption during a burst UMTS Stand-by mode DRX=6 UMTS Stand-by mode DRX=9 UMTS data mode TX: Maximun power Channel: B1 : 9613, 9750, 9887 B8 : 2713, 2788, 2862 GSM900 / GSM850 DCS / PCS All band All band 1. 4mA GSM900 / GSM850 DCS / PCS Typ. 50 µA 3mA 1. 8mA 1. 4mA 280mA 200mA 600mA 520mA 310mA 310mA 3mA 1. 8mA 1. 4mA 260 mA 180 mA 600 mA 520 mA 310 mA 310 mA 25° C Max 100 µA 3. 5mA 2mA 1. 6 mA 290 mA 200 mA 750 mA 610 mA 430 mA 340 mA 4. 5mA 3. 5mA 3mA 280mA 200mA 650mA 550mA 330mA 320mA +85° C Typ. The HILONC-3GPS behavior in the GPRS stand-by mode is similar to the GSM stand-by mode. The power consumption also depends on DRX and on other network settings (number of adjacent cells, etc. ). It is between 1. 4 mA and 2. 8 mA. 1. 95A 1. 75A 1. 75A 1. 2A 3 mA 1. 4 mA 1. 1A 3. 5 mA 1. 6 mA 3mA 1. 1A All band 650mA 650 mA 700 mA 650 mA TBD Figure 4: Typical GPRS burst in the GSM900 frequency band TBD Figure 5: Typical GSM burst in the GSM900 frequency band A burst transmission occurs in the Standby, Communication and GPRS modes. This measurement is performed with a 22 µF capacitor in the power supply path required to remove the overshoot. Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 22/49 3. 15. 4 VGPIO This supply output is available on an external pin of the module and can supply +2. 85V external components. The current capability for 2. 85V output: - 290mA in the active mode 3. 15. 5 Vbackup An internal mechanism of the HILONC-3GPS module is able to manage the charge of the backup battery. More details about the battery choice and the charge schematics are given in the Application Notes. Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 23/49 4. 4. 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 PINOUT I/O CONNECTOR PIN ASSIGNMENTS Pin name GND GND GND RF GND GND GND GND AUX GND GPS GND RFU UART_DTR UART_DSR UART_CTS UART_RX SDIO_CMD SDIO_DATA2 SDIO_DATA0 PCM_CLK PCM_SYNC RFU RFU RFU RFU RESET VBACKUP Pin N° IO Type GND GND GND Antenna in/out GND GND GND GND Diversity antenna in/out GND GPS RF IN GND RFU Digital output buffer Digital input buffer Digital input buffer Digital input buffer Digital bi-directional buffer Digital bi-directional buffer Digital bi-directional buffer Digital bi-directional buffer Digital bi-directional buffer RFU RFU RFU RFU Digital input buffer Power supply input/output Description GND GND GND GSM/UMTS/HSPA+ antenna in/out GND GND GND GND Diversity GSM/UMTS/HSPA+ antenna in/out GND GPS RF input GND Reserved for use. [. . . ] HILONC-3GPS can be configured as an SPI master or slave mode. Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 36/49 Figure 8: SPI in the master mode Parameter 1/T t(ch) t(cl) t(mov) t(mis) t(mih) Comments SPI clock frequency Clock high Clock low Master output data uncertainty Master input setup Master input hold Minimum 0. 45xT 0. 45xT -5 1. 5 1. 5 Maximum 26 0. 55xT 0. 55xT 5 Unit MHz ns ns ns ns ns Figure 9:SPI in the slave mode Parameter 1/T t(ch) t(cl) t(sov) t(sis) t(sih) Comments SPI clock frequency Clock high Clock low Slave output data uncertainty Slave input setup Slave input hold Minimum 0. 45xT 0. 45xT 0 1. 5 1. 5 Maximum 26 0. 55xT 0. 55xT 15. 8 Unit MHz ns ns ns ns ns 5. 15 SDIO Only supports the master mode. Figure 10: SDIO timing Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 37/49 Parameter t(chrd) t(csurd) t(dhrd) t(dsurd) t(pddwr) t(pdcwr) Comments Command hold Command setup data hold Data setup Propagation delay on data write Propagation delay on command write Minimum 2. 5 5. 0 2. 5 5. 0 -2. 5 -2. 5 Maximum Unit ns ns ns ns 2. 5 2. 5 ns ns 5. 16 DIGITAL AUDIO The audio outputs contain the following characteristics: Parameter Min Typ Max Maximum input range Maximum output range 1. 6 1. 6 1. 8V 1. 8V 2. 1 2. 1 5. 17 RF SIGNAL 5. 17. 1 Loadmismatch The module accepts a VSWR < 20:1 (all phase angles) without damage or permanent degradation. The module accepts a VSWR < 12:1 (all phase angles) without any spurious emission > - 30 dBm. 5. 17. 2 Input VSWR The typical input VSWR is 1. 5:1 (max = 1. 5:1). 5. 17. 3 Antennamatchingnetwork A matching network in the HILONC-3GPS is optimized for a 50 ohm work load. To obtain the best performance in an application, an additional matching circuit and adjustment for actual antenna is required. A -type matching network is recommended in the HILONC-3GPSApplication Note. Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 38/49 6. ENVIRONMENTAL SPECIFICATIONS Min. [. . . ]