User manual SAITEK CYBORG F.L.Y 9 FOR XBOX 360

[. . . ] 8 At the Software Setup screen , select Do not install the SST Programming Software and click Next. 9 At the Registration screen, select Check this box to register now and follow the on-screen instructions, or do not select this option and register later. 10 Click on Finish to complete the installation. Your Saitek controller is now ready for use with your favorite games. [. . . ] If you do not wish to see the Profile Editor at this point, just uncheck the box and click on Finish to complete the installation. Your Saitek controller is now ready for use with your favorite games. For a complete guide on how to program your Saitek controller, visit the Saitek website at www. 1 With your computer switched on, close down any programs that are currently running and insert the Saitek Smart Technology CD into your CD-ROM drive. (If the CD does not run automatically, select Start from the Windows® Taskbar, then Run and type D:\Setup. Note: For your controller to work, you must have a minimum of Microsoft® DirectX® 8. The installer will automatically recognize if this software needs to be added, and will allow you to install it directly from the Saitek Product Companion CD, if necessary. If you are asked to install Microsoft® DirectX® 8. 1, click Install and follow the on-screen instructions, and then restart your computer when prompted. Make sure that you leave the Saitek CD in the drive when restarting. After this software has been installed, you will automatically be taken to the installation to continue with the next step. In the Profile Editor, choose the control to which you wish to assign a keyboard command. You do this by leftclicking on the control's cell in the control list on the right of the screen. With the cursor flashing, type in the key commands and then click on the green tick mark when complete. Repeat this procedure for all the buttons you would like to program and then click File, Save at the top of the Profile Editor window. 5 Give the profile a name (it is recommended you name it after the game for which the profile is intended) and then click Save. 6 To enable the profile either click the Profile Now icon at the top of the Profile Editor (it looks like a black and yellow crosshair) or right-click on the controller icon in your taskbar and select the name of the profile from the pop-up list of options. 7 You will notice that when a profile is loaded that the controller icon in your taskbar has a green square behind it, indicating that a profile is currently loaded. If you wish to unload a profile simply right-click on the controller icon and click Clear Profile from the pop-up list of options. For a complete guide on how to program your Saitek controller, visit the Saitek website at www. Q A My computer is not recognizing the Saitek Controller ­ what's wrong?Unplug your controller and plug it back in, making certain that is securely attached. [. . . ] To contact your local Saitek Technical Support Center, please look up the relevant contact details on the separate Technical Support Center sheet that came packaged with this product. 1 2 3 Warranty period is 2 years from date of purchase with proof of purchase submitted. operating instructions must be followed. Product must not have been damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our own service facility or an authorized service center, use or installation of nonSaitek replacement parts in the product or the modification of this product in any way, or the incorporation of this product into any other products, or damage to the product caused by accident, fire, floods, lightning, or acts of God, or any use violative of instructions furnished by Saitek plc. [. . . ]