User manual SAITEK CYBORG V.1 MOUSE

[. . . ] The technical support area will provide you with all the information you need to get the most out of your product and should solve any problems you might have. With your PC on, insert the Mouse's USB plug into one of your PC's USB sockets. Troubleshooting Mouse not detected Make sure the mouse cable is plugged into the correct USB port. a USB mouse can only connect to a USB port. [. . . ] This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and; 2 This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Take frequent breaks, get up and walk around several times every hour. Keep your shoulders relaxed with your elbows at your side. Position your keyboard and mouse so you do not have to reach. Adjust your chair and keyboard so your upper arms and wrists are straight. Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; · , 7480 Mission Valley Rd, Suite 101, San Diego, CA 92108-4406 Canada ICES-003 Operation is subject to the following two conditions: This device may not cause interference, and; This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Conditions of Warranty 1 Warranty period is 2 years from date of purchase with proof of purchase submitted. 2 3 Operating instructions must be followed. Specifically excludes any damages associated with leakage of batteries. Note: Batteries can leak when left unused in a product for a period of time, so it is advisable to inspect batteries regularly. 4 Product must not have been damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our own service facility or an authorized service center, use or installation of non-Saitek replacement parts in the product or the modification of this product in any way, or the incorporation of this product into any other products, or damage to the product caused by accident, fire, floods, lightning, or acts of God, or any use violative of instructions furnished by Saitek plc. [. . . ] This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. there are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. [. . . ]