User manual SAITEK PX5000

[. . . ] Important: The PX5000 uses advanced self calibration technology to ensure absolute precision game control. Do not press any of the gamepad buttons or move the analogue mini joysticks until 5 seconds after pressing the reset button on the Sony PlayStation®2. This may affect game play. GETTING CONNECTED: IT'S SO EASY! 1 Before you start, make certain that your Sony PlayStation®2/ PS oneTM/PlayStation® is turned OFF!2 Insert the Saitek PX5000 connector plug into one of your game console's controller ports. [. . . ] It's essentially a series of commands or actions that can be saved and stored, and then recalled during game play by pressing a single button!This button, which is used to trigger your programmed macro sequence, is called a Macro Key, and each assigned Macro Key can be used to trigger a sequence of up to 12 steps 3 PLAY IT SAFE!Whether you're fighting off the enemy, or in the middle of an exciting race, remember that it's important to be aware of how you are sitting and how you're holding the PX5000 gamepad!Try not to stay in the same position for too long, and be sure to take breaks now and then. Be smart--don't take a chance on straining your wrists, hands, or fingers!Plus, a word of caution: If you have strained muscles, broken bones, or joint problems in your fingers, hands, or arms, do not use the gamepad with any games that support the vibration feature. ENGLISH of your choice!When a Macro Group has been activated, the group's name and number will be displayed. You can call up any of that group's programmed sequences instantly during game play by holding down MACRO and pressing one of the designated Macro Keys. As you can imagine, this feature has the potential to add a tremendous amount of power to your game-playing abilities. So, let's go ahead and learn how to create your own macros!After pressing SETUP to enter Setup Mode, the  menu option will automatically be displayed. If you're already in Setup Mode, move the right joystick down until  appears in the display. Press the MACRO button to enter Macro Mode. The display will show MACRO:1, along with MACROS. To select a different Macro Group, move the right joystick to the right to cycle through MACRO:1, MACRO:2, and MACRO:OFF. Press MACRO to confirm your displayed selection. The display will show UPDATING!, and then ACTIVATE?. You now have a choice between activating or programming/editing a macro: Moving the right joystick up and down will alternate the display between ACTIVATE?To activate a Macro Group, go to Option A, below. To program, edit, or delete a Macro Group, go to Option B, below. > OPTION A: TO ACTIVATE A MACRO GROUP: (1) After entering Setup Mode and selecting a Macro Group (Steps a through e, above), press MACRO when ACTIVATE?This will turn your selected Macro Group on and automatically quit Macro Mode, with that Macro Group's name and number showing in the display. [. . . ] As noted in Section 3, the gamepad's memory can become corrupted if your console is turned off or unplugged while UPDATING!If this occurs, the gamepad will have to be reset, and the memory erased, as follows: Press <setup to enter setup mode. Press and hold the [, }, ], {, R1, and R2 buttons, and press SETUP. Pressing MACRO at this point will show UPDATING! [. . . ]