User manual SAITEK X52 FLIGHT CONTROL SYSTEM

[. . . ] Two-stages can be programmed with separate fire functions. 2 x 8-way hat switches -1 pre-defined as point of view; select from multiple view perspectives and assign frequently used commands. mode selector switch 3-position rotary switch with tristate LED to indicate program mode. 3 Fire Buttons Backlit buttons conveniently positioned on joystick head for instant access in the heat of the battle. [. . . ] You can also view details This tab is shown above: Using the MFD The MFD, or Multi-Functional Display, is an integral part of your throttle unit. You can change some of the settings that determine the way your MFD works. For example, you may want to increase the brightness of the display, or change the way the date is shown. You do this in the MFD tab of the Saitek X52 Flight Stick Properties window. See Maintaining MFD settings in the section Maintaining your controller settings for more information. Features of the MFD The MFD is divided into three sections: ¥ The mode section is at the top of the MFD and shows the currently selected mode. ¥ The center section of the MFD is used to view the names of buttons on your flight stick and throttle, and to view and change the current profile. It can show the current time in up to three time zones. The layout of the MFD is shown right: The three buttons beneath the MFD are used to change the time display and to operate the stopwatch. Working with modes The Saitek X52 FCS offers extensive opportunities for you to configure your controller to work the way you want it to. You do this by creating profiles, using the SST programming software. You can create up to six different modes that determine the actions performed when you press buttons on the flight stick and throttle. You can use your MFD to view the mode that is currently selected. changing the mode You change the mode by rotating the mode selector switch on your flight stick. As you do this, the MODE number displayed on the MFD changes to reflect your selection. Using additional modes Three modes are available by default. You can increase this to six using the pinkie switch on your flight stick. To do this you must designate the pinkie switch to perform the same function as the Shift key, using the SST programming software. You can then select one of the additional modes by holding down the pinkie switch as you rotate the mode selector switch. When you do this, the word SHIFT is displayed in the mode section of your MFD. Within each profile, you can use the following modes: If you have selected one of the three pinkie modes described above, the word SHIFT is displayed, because the pinkie switch is acting as a Shift key. Working with profile information You can use the center section of the MFD to view the names assigned to buttons on your flight stick and throttle. [. . . ] If you do not have access to the internet, or if the website cannot answer your question, please contact your local Saitek Technical Support Team. We aim to offer quick, comprehensive and thorough technical support to all our users so, before you call, please make sure you have all the relevant information at hand. To find your local Saitek Technical Support Center, please see the separate Technical Support Center sheet that came packaged with this product. Warranty period is 2 years from date of purchase with proof of purchase submitted. [. . . ]