User manual SAMMY DOLPHIN BLUE

[. . . ] Your game is assembled and should not need any assembly. Level your game using enclosed Leg levelers. and Canada 120V / 125V - 3A; Europe 220V / 240V - 2A. The minimum space required for operation in your locations should be: 80" high 30" wide 75" depth THE GAME MUST BE LEVEL. [. . . ] Press START button to save Gun accuracy and enter GUN TEST mode, press START button again to go back to Main menu. You can test accuracy in GUN TEST mode. SHOOT CENTER MARK ONLY TO ADJUST PRESS START BUTTON TO GUN TEST GUN TEST Gun Test 1. At Gun Adjust screen, press START button to go to test mode. Shoot all around the screen to see Gun's accuracy. Press START button to go back to Main menu. X PRESS START BUTTON TO EXIT 2. COLOR TEST Use this screen to check the color of monitor. The color blocks in the center should be four bands (Red, Green, Blue and White from top to bottom), each with a color scale from dark to bright, left to right. If the screen does not match this description, adjust the Monitor as described in the Monitor's manual. * Press the START button to exit and go back to the TEST MENU screen. COLOR TEST RED GREEN BLUE WHITE PRESS START BUTTON TO EXIT 7 3. CROSS HATCH Use this screen to check the size of picture. The CROSS HATCH test pattern has a White grid on a Black background. RETURN TO TEST MENU PRESS START BUTTON TO CHOOSE PRESS GUN TRIGGER TO SELECT HIGH SCORE CLEAR ARE YOU SURE YOU WANT TO CLEAR HIGH SCORE?YES NO PRESS START BUTTON TO CHOOSE PRESS GUN TRIGGER TO SELECT NOTE: Do not proceed if Gun test is accurate. GUN DATA DEFAULT If you have problem with Gun sighting , you may have to clear the Gun data. After clearing Gun data, the game will be reset to factory default setting. See the following for how to clear saved data. Enter TEST MENU and select OPTIONAL SETTING. Press START BUTTON to choose GUN ADJUST DEFAULT. Select YES by pressing START BUTTON and pressing GUN TRIGGER to clear Gun data. The screen will return to previous screen automatically after clearing Gun data. Use this screen to go back to normal game mode. After selecting this function, the game will automatically take you to the normal game screen. Make sure to turn OFF "DIP SWITCH 1, #8" or you will return to test mode upon powering on. GUN ADJUST DEFAULT ARE YOU SURE YOU WANT TO SET GUN ADJUST DEFAULT? [. . . ] WARNING: DO NOT TURN UP VOLTAGE MORE THAN +5. 25V OTHERWISE YOUR PCB WILL SUSTAIN SERIOUS DAMAGE. 3) ENTER BACK UP CLEAR IN TEST MODE, THEN SELECT YES TO CLEAR BACK UP DATA. NOTE: YOU DON'T HAVE TO DO "GUN ADJUST" IN TEST MODE. 4) ENTER GUN TEST IN TEST MODE TO CHECK GUNSHOT. [. . . ]