User manual SAMMY SIMPLE SIMON

[. . . ] 2 Open FRONT GLASS DOORS with the Maintenance Keys. 3 Fill prizes on to PRIZE HANGING BAR as shown. 4 Close FRONT GLASS DOORS and lock with the Maintenance Keys. PRIZE HANGING BAR KEY CHAIN KEY RING PRIZE NOTICE When you fill prizes, Do not put weight on the arm units or any window frames. Keep clean all the window frames and arm unit rails. 5 HOW TO HANG PRIZE When you hang prize on the PRIZE HANGING BAR, you should hang by the KEY RING as shown. [. . . ] You can adjust game settings for left side game. You can adjust game settings for right side game. Receive 1 free play for player on left side by hitting this switch. When you get any errors, you can stop error noise by hitting this switch. SERVICE SWITCH (R): Receive 1 free play for player on right side by hitting this switch. When you get any errors, you can stop error noise by hitting this switch. TEST SWITCH (L): If you hit this switch in the game mode, it does not work. If you hit this switch with TEST SWITCH (R) at the same time, you will go to the test mode. When you get any errors, stop error noise by first hitting SERVICE SWITCH and then hit this switch. If you hit this switch in the game mode, it does not work. If you hit this switch with TEST SWITCH (L) at the same time, you will go to the test mode. When you get any errors, stop error noise by first hitting SERVICE SWITCH and then hit this switch. Press one of the TEST SWITCHES and the error will be cleared. Press one of the TEST SWITCHES and the error will be cleared. Press one of the TEST SWITCHES and the error will be cleared. Press one of the TEST SWITCHES and the error will be cleared. After the claws close , they will not open. Press one of the TEST SWITCHES and the error will be cleared. Not used The coin is sticking in the coin mech. Press the coin reject button and take the coin out. Press one of the TEST SWITCHES and the error will be cleared. A 3 A 2 A 1 b 6 b 5 b 4 PRIZE CATCH SENSOR b 3 DRIVE SENSOR/ FORWARD-BACK DRIVE SENSOR/UP-DOWN b 2 b 1 DRIVE SENSOR/LEFTRIGHT CLAW TIMER E 1 C C 2 1 COIN SWITCH COIN SWITCH 12 LED (L) LED (R) ERROR SERVICE SWITCH CONTENTS You are pressing the SERVICE SWITCH too long. Press one of the TEST SWITCHES and the error will be cleared. The cabinet is not placed on a level surface or has been shaken. [. . . ] · When you break the sensor line between the claws with your hand, PUSH BUTTON 1 (UP) · · When you break the sensor line in the prize door duct by your hand, the prize door light will light a few seconds and the prize payout meter will count. * Press one of the TEST BUTTONS in this menu and you will go to #5/COIN TEST. When you push on the front of the arm unit, PUSH BUTTON 2 (SIDE) will light. 5 COIN TEST · The LED DISPLAY shows "5". · When you insert a coin, the coin meter will count. [. . . ]