User manual SAMMY TURKEY HUNTING USA CONVERSION KIT

[. . . ] Change the GAME CABINET · MARQUEE STYRENE Change the old marquee to the TURKEY HUNTING USA Marquee Styrene. NOTE: If the TURKEY HUNTING USA Marquee Styrene does not fit your cabinet, you should cut the marquee to fit. · CONTROL PANEL Change the parts on the control panel. [. . . ] The color blocks in the center should be four bands (Red, Green, Blue and White from top to bottom), each with a color scale from dark to bright, left to right. If the screen does not match this description, adjust the Monitor as described in the Monitor's manual. * Press the START button to exit and go back to the TEST MENU screen. COLOR TEST RED GREEN BLUE WHITE PRESS START BUTTON TO EXIT 3. CROSS HATCH Use this screen to check the size of picture. The CROSS HATCH test pattern has a White grid on a Black background. Check following: - The grid line should be straight, and the lines should not have excessive pincushion or barrel distortion. - "Out"line of grid line is the same size as "Out"line of game screen. So, "Out" line should be able to be seen with no overflow of grid lines on screen. If these are not as above, adjust the Monitor as described in the Monitor's manual. * You can exit and go back to the TEST MENU screen by press START button. CROSS HATCH PRESS START BUTTON TO EXIT 4. I/O TEST Use this screen to check the switches in this game. To check the functioning of each switch, activate it and watch the corresponding OFF letters change to ON. If the ON and OFF letters do not appear correctly, check the Harness connections and Switches. * Press START button and Gun trigger simultaneously to exit. I/O TEST START PUMP TRIGGER SERVICE COIN A COIN B TEST : : : : : : : OFF OFF OFF OFF OFF OFF OFF PRESS START & GUN TRIGGER TO EXIT 5. SOUND TEST Use this screen to check all game sounds. You can check each sound in this game. SOUND TEST SOUND CODE 000 RIFLE 1 FORWARD : PLAY : START GUN * Press START button and Gun trigger simultaneously to exit. PRESS START & GUN TRIGGER TO EXIT 10 6. MEMORY TEST Use this screen to check RAM and ROM on the Main P. C. B. will automatically check them when you enter this screen. [. . . ] (But you will have to make sure to turn OFF "DIP SWITCH 1, #8". ) 12 7. TROUBLE WITH GUN SHOOTING If you have trouble because you can't shoot to the corner of the screen, you may have to adjust the monitor brightness. Turn up the monitor brightness until you can shoot the corner of screen. [. . . ]