Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SAMSON SCONVERT. We hope that this SAMSON SCONVERT user guide will be useful to you.
Lastmanuals help download the user guide SAMSON SCONVERT.
Detailed instructions for use are in the User's Guide.
[. . . ] S Class Signal Processors
Line Level Converter Box
Table Of Contents
Introduction and Features Front and Rear Panel Layout Operating the S convert Using the LEVEL controls Typical Set-up Wiring Guide Specifications
3 4
5 6 7 8
Copyright 2003, Samson Technologies Corp. Printed January 2003 Samson Technologies Corp. [. . . ] -10 OUTPUT RIGHT- RCA connector outputs the right side -10 dBV signal. -10 OUTPUT LEFT- RCA connector outputs the left side -10 dBV signal.
4 1 +4 LEVEL - Control knob used to adjust the signal level connected to the +4dBu, XLR inputs. +4 LEFT INPUT- XLR balanced input for connecting left, +4dBu input signals.
5
2
Rear Panel Layout C +4 LEFT OUTPUT- XLR balanced connector outputs the left, +4dBu signal. +4 RIGHT OUTPUT- XLR balanced connector outputs the right, +4dBu signal. -10 RIGHT INPUT- RCA input for connecting right, -10dBV input signals. DC POWER INPUT- Connect the supplied power adapter here. -10 LEVEL - Control knob used to adjust the signal level connected to the -10dBV, RCA inputs.
D
E A B -10 LEFT INPUT- RCA input for connecting left, -10dBV input signals. POWER LED - Green LED will illuminate when power is on indicating the S convert is ready for operation.
F G
3
Operating the S convert
The basic procedure for setting up and using your S convert is simple and takes only a few minutes. Remove all packing materials (save them in case of need for future service) and check to make sure that you remove the supplied AC power adapter. · Connect the output from the device you want to level match (like a consumer CD player using standard RCA cables) to the S converts 10dBV, Left & Right RCA inputs. Using standard XLR to XLR mic cables, connect the S convert's +4dBu Left & Right OUTPUTS to the professional DAT recorder balanced inputs. Set the -10 dBV LEVEL control to the detent position (12:00 o'clock). Set the +4 dBu LEVEL control to the detent position (12:00 o'clock). Plug the S converts power adapter into a wall outlet and switch the unit on by pressing the power switch. [. . . ] Follow the cable diagrams below for connecting your gear.
3
7
S convert Specifications
Frequency Response Noise Level Maximum Ouput Level Max Input Level Input Impedance Output Impedance Maximum Gain THD Noise Floor Power Dimensions Weight 10 Hz to 100kHz -110 dBu Bal: +18 dBu Unbal: +16 dBV Bal: +22 dBu Unbal: 20 dBV RCA: 100k Ohm XLR: 10k Ohm RCA: 100 Ohm XLR: 100 Ohm balanced +4 dBu In: -6 dB -10 dBV In; +19 dB . 003% Max <-90 dBu 18 VDC adapter 5. 65" L x 4. 13" W x 2" H (144mm L x 105mm W x 51mm H) 16. 5 oz. , 419 gm.
Samson Technologies Corp. Box 9031 Syosset, NY 11791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888 www. samsontech. com [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSON SCONVERT
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSON SCONVERT will begin.
