User manual SAMSUNG NP550P5C-S07AU

[. . . ] · The Mains plug is used as a disconnect device and shall stay readily operable at any time. · This apparatus shall always be connected to a AC outlet with a protective grounding connection. · To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION · INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. 2 English 2011-03-17 1:47:06 NP550P5C-S07AU_XY_0221. indd 2 Precautions · Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product. [. . . ] Enter a desired 4-digit password using the number buttons. (The default password is 0000. ) After you have set your password, select an age rating you want to set for the BD Parental Rating and a rating level you want to set for the DVD Parental Rating. The product will only play Blu-ray discs rated at or below the age rating and DVD discs rated below the numeric rating unless the password is entered. Larger numbers indicate more mature content. General Front Display Change the brightness of the front panel. · Bright : Brighten the display window. NOTE The Power button and the Function button are not possible to change the Brightness. Light Effect You can activate or deactivate the light effect on the top of the product. · Always On : Activate Light Effect at all times. · Auto : Activate Light Effect when turning the product on and off or when slot-in/out the disc. Select when installing the product in your home. · Off : Turn Light Effect off at all times. BD Parental Rating This will prohibit playback of Blu-ray disc rated above Parental Rating. DVD Parental Rating Prevent playback of DVD discs with specific numerical ratings unless a password is entered. 42 English 2011-03-17 1:48:02 NP550P5C-S07AU_XY_0221. indd 42 03 Setup Network Remote Control The Network Remote Control function lets you control your Blu-ray Home Cinema from a remote device such as a smart phone through a wireless connection to your local area network. To use the Network Remote Control function, follow these steps: 1. Select On in the Network Remote Control menu. To upgrade By Downloaded, follow these steps: 1. If upgrade software has been downloaded, you will see the software version number to the right of By Downloaded. Select By Downloaded, and then press the ENTER button. The product displays a message asking if you want to upgrade. When the update is complete, the product turns off automatically, and then turns on. NOTE The disc tray must be empty when you upgrade the software using the USB Host jack. When the software upgrade is done, check the software details in the software Upgrade menu. Do not turn off the product during the software upgrade. It may cause the product to malfunction. Software upgrades using the USB Host jack must be performed with a USB memory flash stick only. NOTE When the system upgrade is done, check the software details in the software Upgrade menu. By Disc To upgrade by Disc, follow these steps: 1. Download the latest disc software upgrade zip archive to your computer. You should have a single folder with the same name as the zip file. Finalise the disc before you remove it from your computer. Insert the disc into product. Do not turn off the product during the software Upgrade. It may cause the product to malfunction. To use the By Downloaded function, your product must be connected to the Internet. 44 English 2011-03-17 1:48:03 NP550P5C-S07AU_XY_0221. indd 44 03 Setup Download in Standby Mode You can set the Download in Standby Mode function so that the product downloads new upgrade software when it is in Standby mode. [. . . ] You've requested a title or chapter number or search time that is out of range. · Press and hold the STOP ( I ) button on front panel for more than 5 seconds with no disc inserted. All settings will revert to the factory settings. If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV. No HDMI output. · Check the connection between the TV and the HDMI jack of the Product. [. . . ]