User manual SAMSUNG AV-R610

[. . . ] Digital Surround AV Receiver System HT-AS610 THIS APPLIANCE IS MANUFACTURED BY: Instruction Manual (AV-R610) AH68-01853B Safety Warnings CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Precautions GB Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. VOLUME PREPARATION CAUTION RISK OF ELECTRIC SHOCK. [. . . ] "SETUP MODE" 2 Press FUNCTION button 4 times. "DRC SETUP" appears on the display. OPERATION SURROUND 3 Presstime this button, DVDbutton to select theinDVD or CD function. 4 Press SELECT( , ) button to set the digital input. Each time you press this button, OPTICAL COAXIAL will be selected in turn. To Exit Setup Mode Wait for about 5 seconds or press SETUP button. "SETUP MODE OFF" appears on the display and the unit exits Setup Mode. button. "DRC STD" appears on 4 Press SELECT( , ) button to set DRC. Each time you press this button, DRC : STD DRC : MAX DRC : MIN will be selected in turn. To Exit Setup Mode Wait for about 5 seconds or press SETUP button. "SETUP MODE OFF" appears on the display and the unit exits Setup Mode. Setting DRC STD : Sets DRC effect to standard. MIN : Sets DRC effect to minimum. 24 25 Test Tone Use test tone to check the speaker connection status or level. GB To Automatically Output Test Tone REMOTE CONTROL Press TEST TONE button. Test signal will be automatically output as follows; F. L CEN F. R S. R S. L S. W. During test tone output, press . . . button to adjust the speaker output level To Manually Output Test Tone MAIN UNIT OPERATION from -10 to +10 dB by 1 step. To Stop Test Tone Press TEST TONE button again. MAIN UNIT button. 1 Press SETUPappears on the display and enters into Setup Mode. "SETUP MODE" 2 Press FUNCTION button 5 times. "TEST-T AUTO" appears in the display. 3 Press SURROUND button. Test signal will be automatically output as follows; F. L CEN F. R button. 1 Press SETUPappears on the display and the unit enters into Setup Mode. "SETUP MODE" 2 Press FUNCTION button 6 times. "TEST-T MANU" appears in the display. 3 Press SURROUND button. be selected in turn. Each time you press this button, F. L CEN F. R S. R S. L S. W will 4 Press SELECT( want. , ) button to set the test tone as you S. R S. L S. W . During test signal output, press SELECT ( , You can adjust the speaker output level from -10 to +10dB by 1 step. The sound gets quieter at -10dB and louder at +10dB. ) button to adjust the speaker output level from -10 to +10 dB by 1 step. To Stop Test Tone Press SETUP button 1 time. "SETUP MODE OFF" appears on the display and test signal stops. To Stop Test Tone Press SETUP button 1 time. "SETUP MODE OFF" appears on the display and test tone stops. Test Tone Output F. L (Front-Left) : -10 ~ +10dB CEN (Center) : -10 ~ +10dB F. R (Front-Right) : -10 ~ +10dB S. R (Surround-Right) : -10 ~ +10dB S. L (Surround-Left): -10 ~ +10dB S. W (Subwoofer): -10 ~ +10dB 26 27 Setting Speaker Level You can set the balance and level of speakers GB Remote Control SPK the 1 Presstime youLEVEL button to select F. R speaker you want. Each press this button, F. L CEN S. R S. L S. W SPK LVL OFF will be selected in turn. MAIN UNIT to set the speaker 2 Press . . . You can adjust it from The sound gets quieter at -10dB and louder at +10dB. Default setting value is 00dB. 1 Press SETUP button. "SETUP MODE" appears on the display and enters into Setup Mode. 8 times. "LEVEL SETUP" appears on the OPERATION To Exit Setup Mode Wait for about 5 seconds or press SPK LEVEL button on the remote control to select SURROUND button. 3 Presstime you press this button, F. L CEN F. R S. R S. L S. W Each SPK LVL OFF. will be selected in turn. 4 Press SELECT( you want. , ) button to set to the speaker level You can adjust it from -10 to +10dB by 1 step. The sound gets smaller at -10dB and louder at +10dB. Default setting value is 00dB To Exit Setup Mode Wait for about 5 seconds or press SETUP button. "SETUP MODE OFF" appears on the display and exits Setup Menu. Setting Speaker Level F. L (Front-Left) : -10 ~ +10dB CEN (Center) : -10 ~ +10dB F. R (Front-Right) : -10 ~ +10dB S. R (Surround-Right) : -10 ~ +10dB S. L (Surround-Left): -10 ~ +10dB S. W (Subwoofer): -10 ~ +10dB 28 29 Dolby Pro Logic ll Mode This mode provides 5. 1 channel sound from 2 channel sources GB REMOTE CONTROL Press MODE button. Each time you press this button, CINEMA MATRIX GAME PROLOGIC MUSIC will be selected in turn. MAIN UNIT 1 Press SURROUND button to select "DPL ll" Mode. Each time you press this button, DPL ll SFE STEREO will be selected in turn. 2 Press SELECT( OPERATION , ) button. ) button, CINEMA MATRIX GAME PROLOGIC MUSIC will be selected in turn. Each time you press SELECT ( ) button, MUSIC PROLOGIC GAME MATRIX CINEMA will be selected in turn. Each time you press SELECT ( To Exit Setup Mode Wait for about 5 seconds. To Exit Setup Mode Wait for about 5 seconds. Dolby Pro Logic ll Mode MUSIC : Provides 5. 1 Channel Surround sound to digital, analog or existing stereo sources such as CD, TAPE, FM, TV and Stereo VCR. CINEMA : Adds realism to the movie soundtrack. MATRIX : You will hear 5. 1 Channel Surround sound. [. . . ] Do not use this unless necessary. To Cancel Sleep Timer Press SLEEP button until SLEEP : OFF appears on the display. Adjust the Display You can adjust the brightness of the display. Mute Function This function is useful when answering a doorbell or telephone call. REMOTE CONTROL Press the DIMMER button. Each time you press this, the brightness of the display will be adjusted. REMOTE CONTROL Press the MUTE button. MUTE appears on the display. Using Headphone Use headphones (not supplied) for private listening pleasure. To Output Sound Again Press MUTE button again. MUTE will disappear and sound will Output. Connect the headphone to the headphone jack and listen to music. Do not turn the volume up too high when you use headphones as It MISCELLANENOUS may damage your hearing. SLEEP, Mute and Adjust Display function can only be operated with the remote control. 42 43 Operating your TV with the Remote Control TV Brand Code List GB 1 2 3 4 5 Brand Code Number 056, 057, 058 001, 015 001, 002, 003, 004, 005, 006, 007, 008, 009, 010, 011, 012, 013, 014 001, 018, 040, 048 057, 058, 081 059, 060 018 003 003, 018, 025 097 003 018 046 015 003, 005, 061, 082, 083, 084 062 003 059, 061, 063 003 002, 003, 004, 015, 016, 017, 018, 019, 020, 021, 022, 023, 024, 025, 026, 027, 028, 029, 030, 032, 034, 035, 036, 040, 048, 059, 090, 099, 100 040 003 003, 015, 040, 046, 059, 061, 064, 082, 083, 084, 085 019, 065, 103 003 003 006, 040, 056, 059, 066, 067, 068 040 015, 018, 050, 059, 069 045 056, 059, 067, 086 070 059, 061, 087, 088 003, 015, 040 015 001, 015, 016, 017, 037, 038, 039, 040, 041, 042, 043, 044, 054, 086 Brand LUXMAN LXI(SEARS) MAGNAVOX MARANTZ MATSUI MGA MITSUBISHI/MGA MTC NEC NIKEI ONKING ONWA PANASONIC PENNEY PHILCO PHILIPS Code Number 018 019, 054, 056, 059, 060, 062, 063, 065, 071 015, 017, 018, 048, 054, 059, 060, 062, 072, 089 040, 054 054 018, 040 018, 040, 054, 059, 060, 075, 101 018 018, 019, 020, 040, 059, 060 003 003 003 006, 007, 008, 009, 054, 066, 067, 073, 074 018 003, 015, 017, 018, 048, 054, 059, 062, 069, 090 015, 017, 018, 040, 048 054, 062, 072, 112, 114, 117, 118 063, 066, 080, 091 015, 018, 059 040 006, 066, 067 017, 048, 056, 060, 061, 075 018, 059, 067, 076, 077 078, 092, 093, 094 003, 019 040 000, 015, 016, 017, 040, 043, 046, 047, 048, 049, 054, 059, 060, 098 019, 061, 065, 101, 102, 103, 104 003, 040, 060, 061 015, 018, 019 015, 057, 064, 101, 105, 106, 115 057, 058 050, 051, 052, 053, 055, 101 003, 040 001 018 Brand SYLVANIA SYMPHONIC TATUNG TECHWOOD TEKNIKA TMK TOSHIBA VIDTECH VIDECH WARDS YAMAHA YORK YUPITERU ZENITH ZONDA DONGYANG LOWE FINLUX YOKO LOEWE OPTA PHONOLA RADIOLA SCHNEIDER AKAI GRUNDIG BLAUPUNKT SIEMENS CGE IMPERIAL MIVAR SABA BANG&OLUFSEN BRIONVEGA FORMENTI METZ WEGA RADIOMARELLI SINGER SINUDYNE TELEFUNKEN Code Number 018, 040, 048, 054, 059, 060, 062 061, 095, 096 006 018 003, 015, 018, 025 018, 040 019, 057, 063, 071, 101 107, 109, 110, 111, 113 018 059, 060, 069 015, 017, 018, 040, 048, 054, 060, 064 018 040 003 058, 079 001 003, 054 054 054, 109, 114 054 054, 114 054, 112, 114 054, 112 054 103 108, 109, 113, 119, 120, 121 108 108 113 113 113 114 114 114 114 114 114 114 114 114 116 Press TV button to set the remote to TV mode. ADMIRAL(M. WARDS) A MARK ANAM Press POWER button to turn on the TV. Point the remote control toward the TV. AOC BELL & HOWELL(M. WARDS) BROCSONIC CANDLE CETRONIC CITIZEN CINEMA CLASSIC CONCERTO CONTEC CORONADO CRAIG CROSLEX CROWN CURTISMATES CXC DAEWOO While holding down POWER button, enter the code corresponding to your brand of TV. If the code matches the TV's code, the TV will be turned off. If there is more than one code listed for your TV in the table, enter one at a time to determine which code works. DAYTRON DYNASTY EMERSON PIONEER PORTLAND PROTON QUASAR RADIO SHACK RCA/PROSCAN REALISTIC SAMPO SAMSUNG If TV is turned on or off when you press the power button of the remote control, the setting is completed. You can use the TV POWER, VOLUME, CHANNEL, MENU and FISHER FUNAI FUTURETECH GENERAL ELECTRIC(GE) HALL MARK HITACHI INKEL JC PENNY JVC KTV KEC KMC LG(GOLDSTAR) MISCELLANENOUS SANYO SCOTT SEARS SHARP SIGNATURE 2000(M. WARDS) SONY SOUNDESIGN SPECTRICON SSS Numeric buttons (0~9). The remote control may not work on some brands of TVs. Also, some operation may not be possible depending on your brand of TV. The remote control will work with Samsung TVs by default. 44 45 Operating your DVD (VCR) with Remote Control VCR Brand Code List Brand Code Number 043, 106 044, 045, 046 088, 089, 090 001, 002, 003, 004, 005, 033 091 019, 047, 092 048, 093 092, 094, 095 001, 033, 049, 091 011 050 050, 072, 096 051 001, 031, 032, 033, 044, 091 006, 007, 008, 009, 010, 011, 012, 013, 014, 015, 016, 017, 018, 046, 051, 091 011 019, 047, 052, 092 025, 031, 032, 044, 046, 094, 095, 097, 098, 099 009, 048, 053, 054, 055, 100 044 001, 031, 032, 033, 056, 091 059, 060, 061 019 020, 021, 049, 054, 062, 100 051 001, 033, 049, 091 001, 033 025 047, 048, 052, 062, 091, 092 001, 033, 047, 052, 063, 064, 065, 092 047, 050, 052, 092 019, 020, 021, 022, 023, 024, 025, 026, 027, 028, 029, 030, 050 020, 025, 044, 048, 050, 053, 054, 055, 062, 100 072 001, 031, 032, 033, 049, 066, 067, 091 001, 019, 033, 047, 052, 092, 110 025, 050 GB Brand MEI MEMOREX MINOLTA MITSUBISHI/MGA MTC MULTITECH NEC OLYMPIC OPTIMUS ORION PANASONIC PENNEY PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND QUASAR RICO RCA/PROSCAN Code Number 001, 033 001, 025, 033, 054, 091, 100 020, 021, 062 068, 069, 070, 101, 102 072 044, 057, 069 019, 047, 052, 057, 092 049, 091 101 103 001, 004, 033, 049, 067, 091, 107 019, 020, 072 001, 020, 021, 033, 062 001, 033, 046, 049, 091, 094 001, 030, 033, 049, 050, 066, 091 025 049 011 001, 033, 049, 067, 091, 107, 108 036 001, 020, 021, 031, 032, 033, 049, 051, 062, 066, 070, 091, 104 001, 009, 025, 033, 044, 048, 054, 091, 101, 105 000, 006, 031, 032, 057, 058, 071, 072, 073, 074, 075, 076, 077, 078, 079, 080, 081 008, 009, 046, 048, 050, 054, 058, 093, 100 092 006, 051, 054, 057, 069, 070, 100, 101 020, 021, 025 043, 105, 106 096 043, 044, 054, 100, 106 096 034, 035, 036, 037, 038, 039, 040, 041, 042, 082, 083, 084, 085, 086 020 001, 033, 044, 049, 066, 091 044 009 Brand TASHIRO TATUNG TEAC TECHNICS TEKNIKA TOSHIBA TOTEVISION TAEKWANG UNITECH VECTOR RESEARCH VIDEO CONCEPTS VIDEOSONIC WARDS Code Number 050 047, 052, 092 044, 047, 052, 092 001, 033, 049, 091 001, 025, 033 006, 051 025, 072 087 072 019 019 072 001, 020, 031, 032, 033, 043, 050, 054, 072, 100, 105, 106, 109 019, 047, 048, 052, 092, 019, 047, 048, 052, 092 1 2 3 4 5 Press DVD button to set the remote to DVD mode. If you operate VCR, press VCR button to set the remote to VCR mode. ADMIRAL(M. WARDS) AWIA AKAI ANAM AOC AUDIO DYNAMIC BELL & HOWELL(M. WARDS) BROKSONIC CANON CAPEHART CITIZEN CRAIG CRITERION CURTIS MATHES DAEWOO Press POWER button to turn on the DVD (VCR). Point the remote control toward the DVD (VCR). While holding down POWER button, enter the code corresponding to your brand of DVD (VCR). If the code matches the DVD (VCR)'s code, the DVD (VCR) YAMAHA ZENITH DVD Brand Code List Brand DENON DOONOON DMTECH FISHER GE HARMAN/KARDON JVC KENWOOD LG MAGNAVOX MITSUBISHI ONKYO OPTIMUS PANASONIC PROSCAN PHILIPS PIONEER RCA SAMSUNG SANYO SONY THETA DIGITAL TOSHIBA YAMAHA ZENITH TAEGWANG PS2 X-BOX APEX MARANTZ DAYTRON DBX EMERSON FISHER FUNAI GENERAL ELECTRIC(GE) GO VIDEO HARMAN KARDON HITACHI HQ INSTANT REPLAY JCL JCP JC PENNY JVC KENWOOD LG(GOLDSTAR) Code Number 003, 032 019 017 002 006 012 010, 013 008 001 004 005, 016 004, 014 011 021 006 004, 023 007, 011, 022, 025 006 000, 027 002 015, 020 011 004, 018 009, 033 004, 024 026 028 029 030 031 will be turned off. If there is more than one code listed for your DVD (VCR) in REALISTIC the table, enter one at a time to determine which code works. SAMSUNG If DVD (VCR) is turned on or off when you press the power button of the remote controller, the setting is completed. You can use DVD (VCR) POWER, VOLUME, PLAY, PAUSE, MISCELLANENOUS SANYO SANSUI SCOTT SEARS SHARP SINGER SIGNATURE 2000(M. WARDS) SHINTOM SONY STOP, SKIP, MENU and Numeric button (0~9). LXI(SEARS) MAGIN MAGNAVOX The remote control may not work on some brands of DVD (VCR)s. STS SYLVANIA SYMPHONIC TANDY Also, some operations may not be possible depending on your brand of DVD (VCR). [. . . ]