User manual SAMSUNG CS-21K10MG

[. . . ] COLOR TELEVISION Owner's Instructions Before operating, please read this manual thoroughly, and retain it for future reference. Register your product at www. samsung. com/global/register Connection Panel (depending on the model) The actual configuration of your TV may be different, depending on your model. Connecting to the RCA Input The RCA¨ connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector. ) Connecting to the RCA Output The RCA connectors are used for equipment, such as a recording VCR or audio system. Rear Panel or cable television network Control Panel (depending on the model) The actual configuration of your TV may be different, depending on your model. or Front (or Side) Panel OE Audio input ´ Video input Headphone jack or Front (or Side) Panel Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks. Headphone jack ´ Video input OE Audio input OE ´ ¨ ^ Ø On-screen menu display Volume adjustment Channel selection Standby indicator Remote control sensor Power on/off Connecting to an Aerial or Cable Television Network Connect the aerial or network input cable to the OE (75 coaxial socket). [. . . ] The ENJOY YOUR WATCHING is displayed, and then the channel which has been stored will be activated. Function Language : English Time Plug & Play Blue Screen : Off Child Lock 5 Function - Plug & Play When the television is initially Plug & Play powered on, several basic customer settings proceed automatically and subsequently. 1 If the television is in standby mode, press the POWER button on the remote control. It flickers for a little while, and then Language menu is displayed. Language English Indonesia Malaysia Adjust Select Re-setting the Plug & Play Method: MENU . . . / (Function) oe/ . . . / (Plug & Play) oe/ Select Enter Exit Ant. Input Check Auto Store Exit 2 Select the appropriated language by pressing the . . . If any language is not selected, the language menu will disappear about 30 seconds later. Make sure that the antenna is connected to the television (refer to page 1). continued. . . 3 English - 3 Channel - Auto Store You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. Channels are sorted and stored Channel in the order which reflects their Auto Store Manual Store position in the frequency range Add/Erase Fine Tune (with lowest first and highest Sort last). The programme originally selected is then displayed. Select Enter Exit To stop the search before it has finished, press the P1 471 MHz 48% MENU button. When finished, the Sort menu Exit is displayed. To sort the stored channels into the desired numerical order, refer to "Channel - Sort". To exit without sorting, press the MENU button. Channel - Manual Store Channel You can store channels, Manual Store including those received via Color System : AUTO cable networks. When storing Sound System : B/G Search : -/+ channels manually, you can Prog. No. choose: - Whether or not to store each Select Adjust Exit of the channels found - The programme number of each stored channel which you wish to identify Channel - Add/Erase Channel You can exclude channels you Add/Erase have chosen from the channels P 1 : Added you scanned. When you scan P 2 : Added P 3 : Added through the stored channels, P 4 : Added those you have chosen to skip are not displayed. All of the Select Adjust Exit channels that you did not specifically choose to skip are displayed during scanning. Color System: AUTO/PAL/SECAM/NTSC4. 43/NTSC3. 58 NTSC4. 43 is a `trick' playback mode used by special VCR's to play PAL-recorded videos in NTSC mode. Sound System: B/G, I, D/K, M Search (When you do not know the channel numbers): The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. (Programme number to be assigned to a channel) Store (When you store the channel and associated programme number) Select Added or Erased by pressing the oe or button repeatedly. If there is no sound or abnormal sound, re-select the sound standard required. Channel - Fine Tune If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine-tune the channel manually. Channel Fine Tune Tune Store Erase : -/+ :? [. . . ] To display normal screen, press it again. (size) Press to display the double-size letters in the upper half of the screen. For lower half of the screen, press it again. To display normal screen, press it once again. [. . . ]