User manual SAMSUNG CS-25M6WT OPEN SOURCE GUIDE

[. . . ] DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz. 2 Contents N PREPARING YOUR TELEVISION I Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I Control Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I Connection Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] : Store : OK OK Store : 9 10 Repeat Steps 6 to 8 for each channel to be stored. When you have finished manual storage, press the TV button or, press the MENU button repeatedly to return to normal viewing Select Adjust Exit 15 Skipping Unwanted Channels ENG Channel Auto Store Manual Store Add/Erase Fine Tune Sort You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning. Select Enter Exit 1 2 3 Press the MENU button. Press the L or M button to select the "Channel" and press the + or ­ button. Press the L or M button to select the "Add/Erase" and press the or ­ button. Result: The "Add/Erase" menu is displayed. Channel Add/Erase P P P P 1 2 3 4 : : : : Added Added Added Added + Select Adjust Exit 4 Channel Add/Erase P P P P 1 2 3 4 : : : : Erased Added Added Added Press the L or M button to select the required channel. To add or erase the desired channel by pressing the + or ­ button. When you have finished adding and erasing channels, press the TV button or, press the MENU button repeatedly to return to normal viewing 5 6 Select Adjust Exit 16 Fine tuning Channel Reception ENG If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to finetune the channel manually. Channel Auto Store Manual Store Add/Erase Fine Tune Sort 1 2 3 Press the MENU button. Press the L or M button to select the "Channel" and press the + or ­ button. Result: The "Picture" menu is displayed. 2 Picture Adjust Color Tone Contrast Brightness Sharpness Color : Normal 100 50 50 50 Press the + or ­ button. Press the L or M button to select the "Adjust", and then press the or ­ button. Result: 3 + When select the "Mode" to "Custom", the "Adjust" menu is displayed. N 4 Select Adjust Exit To adjust the. . . N Color Tone Picture Adjust Color Tone Contrast Brightness Sharpness Color : Normal 100 50 50 50 + or ­ button. Result: You select the required option (Normal, Warm1, Warm2, Cool1, Cool2). Result: The horizontal bar is displayed. Select Adjust Exit N N N N N Contrast Brightness Sharpness Color Tint (NTSC only) N Contrast Contrast 100 91 The "Sharpness" and "Tint" are not available in DVD mode. 5 When you are satisfied with the settings, press the TV button or, press the MENU button repeatedly to return to normal viewing. The television has an "automatic degaussing" system that is activated if magnetic interference is present. To degauss the television screen, switch power off by pressing the " " (ON/OFF) button on the front panel (refer to "Automatic Degaussing to Remove Color Patches" on page 35). If you make any changes to the "Adjust" settings, the picture standard is automatically switched to "Custom". 20 Setting the Digital Noise Reduction ENG If the signal received by your television is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. Picture Mode Adjust Digital NR Custom : On 1 Press the MENU button. Result: The "Picture" menu is displayed. Select Adjust Exit 2 3 4 Press the + or ­ button. Press the L or M button to select the "Digital NR". [. . . ] Press the TTX/MIX ( Result: ) button to activate the teletext mode. The contents page (page 100) is displayed. It can be redisplayed at any time by pressing the (index) button. 3 1 To display the actual broadcast simultaneously with the teletext page, press the TTX/MIX ( ) button. To return to normal viewing press the TV button. 4 32 Selecting a Specific Teletext Page (depending on the model) ENG Press the number buttons on the remote control to enter the page number directly: 1 Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons. Result: The current page counter is incremented and the page is then displayed. 2 If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. [. . . ]