User manual SAMSUNG CW-29Z404N

[. . . ] COLOR TELEVISION Owner's Instructions Before operating, please read this manual thoroughly, and retain it for future reference. Register your product at www. samsung. com/global/register Connection Panel (depending on the model) The actual configuration of your TV may be different, depending on your model. Front (or Side) Panel Rear Panel 3 S-Video input or cable television network 2 Video input 1 Audio input Control Panel (depending on the model) The actual configuration of your TV may be different, depending on your model. Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Front (or Side) Panel Connecting to an Aerial or Cable Television Network Connect the aerial or network input cable to the 1 (75 coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. [. . . ] To search the channels, select Search by pressing the . . . Press the ENTER button again to start search channels. To stop the search, press the ENTER button. When the channel searching has finished, the Time menu is displayed with Clock selected. Search 5 Start Enter Search P 1 C-- ----Stop Enter TV --:-Clock Sleep Timer --:-On Timer Off Timer - - : - On Timer Volume Return Time : Off Off Off : 10 Return Input Source List / Edit Name Source List TV Source List TV You can switch between AV1 ---viewing signal from AV2 ---S-Video ---connected equipment, such as a VCR, DVD, set-top box, and the TV source Move Enter Return (broadcast or cable). You can change the required external source simply by pressing the SOURCE button on the remote control. It might take a short period of time for pictures to be switched. To return to the TV mode, press the TV button on the remote control. 7 102MHz 7% Setup - Plug & Play When the television is initially powered on, several basic customer settings proceed automatically and subsequently. 1 If the television is in standby mode, press the POWER button on the remote control. It flickers for a little while, and then Language menu is displayed. Plug & Play TV English Deutsch Français Nederlands Español Italiano Sverige Português ÏÏËÓÈο 8 Language Press the oe or button to Move Enter Return move to the hour or minute. Set the hour or minute by pressing the . . . continued. . . âetina Srpski Hrvatski Român, , Magyar Polski êÛÒÒÍËÈ ÅÎ, , ÒÍË Türkçe Edit Name You can give a name to the external source. TV AV1 AV2 S-Video Edit Name ---: Belgie VCR : DVD : Cable STB Sat. Game Camcorder DVD Combo Move Enter Return continued. . . Move Enter Return English - 3 Channel - Auto Store You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. Auto Store Channels are sorted and stored TV Belgie Country : Belgie in the order which reflects their Deutschland Search España France position in the frequency range Italia Nederland (with lowest first and highest Schweiz Sverige UK last). The programme originally Eastern Europe Others selected is then displayed. Move Enter Return To stop the search before it has finished, press the Search P 1 C-- ----102MHz MENU button. 7% When finished, the Sort menu Stop is displayed. To sort the stored Enter Return channels into the desired numerical order, refer to "Channel - Sort". To exit without sorting, press the EXIT button. Channel - Manual Store Manual Store TV You can store channels, Programme :P3 including those received via Colour System : AUTO cable networks. When storing Sound System : BG Search : 46MHz channels manually, you can Channel :C1 Store :?choose: - Whether or not to store each Move Adjust Return of the channels found - The programme number of each stored channel which you wish to identify Channel - Add/Delete Add/Delete TV You can exclude channels you P 1 : Added have chosen from the channels P 2 : Added you scanned. When you scan P 3 : Added P 4 : Added through the stored channels, P 5 : Added those you have chosen to skip are not displayed. [. . . ] Remote control malfunctions Replace the remote control batteries. Clean the upper edge of the remote control (transmission window). Check that the "+" and "-" ends of the batteries are inserted correctly. Check that the batteries are drained. Custom: Contrast/Brightness/Sharpness/ Colour/Tint (NTSC only) The television has several settings which allow you to control the picture quality. [. . . ]