User manual SAMSUNG CZ-20F42T OPEN SOURCE GUIDE

[. . . ] DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Mode CS CB CZ System PAL-B/G, D/K, I, SECAM-B/G, D/K, I, NTSC4. 43 (NTSC3. 58; option) PAL-B/G PAL-B/G, D/K, I, SECAM-B/G, D/K, I, NTSC4. 43 The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz. 2 PREPARING YOUR TELEVISION Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front Panel Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Buttons on the Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] x Channel 3 becomes channel 1. 7 Select Adjust Exit To. . . Confirm the exchange of channel numbers Press the. . . x v or w button to select the "Store". Result: "OK" is displayed. You can exchange other channel numbers by selecting "From" and returning to step 4. 8 When you have finished sorting channels, press the TV button or, press the MENU button repeatedly to return to normal viewing 16 Changing Channels Once you have stored the channels on your television, you can switch easily from one channel to another using the remote control. To switch. . . To the next channel To the previous channel To another channel Press. . . The numeric button(s) corresponding to that channel. ENG Pre-Channel Press PRE-CH (Pre Channel button) to switch repeatedly between last two channels displayed. This can be done as many times as required. Channel Scan Press CH. SCAN (Channel Scan button) for a 2 Second review of each added channel. Press any key to exit Channel Scanning. Selecting a Channel Numbered Ten or Over When using the numeric buttons to select a channel stored at programme position ten or higher, follow the instructions below. 1 Press the Result: The button. "--" or "---" symbol is displayed. 2 Enter the two-digit channel number or three-digit channel number. Example: To select channel 42, press 4, followed by 2. To select channel 187, Press -/--/--- till "---" is displayed. The volume setting is retained: When you switch the television to standby mode When you switch the television off using the POWER (ON/OFF) button on the front panel. If there is a power failure. Activating/Deactivating Digital NR If the broadcast signal received by your television is weak, you can activate the Digital Noise Reduction Feature to help reduce any picture disturbance and ghosting that may appear on the screen. Picture Mode Custom : Off Normal : Normal Adjust Digital NR Normal : Size 1 Press the MENU button. Result: The "Picture" menu is displayed. button. Select Enter Exit 2 3 Press the + or Press the or button to select the "Digital NR", and then press or button to select "On". + Picture Mode Adjust Custom Digital NR Normal Size : : On Normal : Normal 4 When you are satisfied with the settings, press the TV button or, press the MENU button repeatedly to return to normal viewing. Select Adjust Exit 21 Extra Sound Settings (depending on the model) ENG Sound Mode Custom Adjust Auto Volume : Off Melody : Off Pseudo Stereo : Off Woofer The following sound settings can be adjusted to suit your preferences. Select Enter Exit Sound Mode Custom Adjust Auto Volume : On Melody : Off Pseudo Stereo : Off Woofer Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. "Auto V olume" lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. This is saved for each Channel individually. You can hear clear melody sound when the TV is powered O N or O FF. Exit Select Adjust Sound Mode Custom Adjust Auto Volume : Off Melody : On Pseudo Stereo : Off Woofer "Pseudo Stereo" converts a monaural sound signal into two identical left and right channels. O nce the "Pseudo Stereo" is set to "O n" or "O ff", the setting applies to the sound effects such as Standard, Music, Movie and Speech. This is saved for each Channel and for external input mode individually. Select Adjust Exit Sound Mode Custom Adjust Auto Volume : Off Melody : Off Pseudo Stereo : On Woofer You can enjoy more magnificent and dynamic sound when watching music, movie or other channel. "Turbo Sound" suitably emphasizes both higher and lower bands of sound (and includes other effects). You can select the Turbo Sound by pressing the "TURBO" button on the Remote Control. This is saved for each Channel and for external input mode individually. 1 2 Exit Press the MENU button. [. . . ] Then, the final score window will be switched to the START window. To exit the Game mode, press the GAME button. 1 4 7 2 5 8 3 6 9 HIT: 0 MISS: 0 L EVEL: 0 SCORE : 0 6 ARROW 200 LIFE 20 SCORE 0010 32 Entering in the Game Zone (Depending on Model) ENG There are two ways of entering the "Game Zone" (a) By the "Game Key" Press the "Game Key" on the Remote control. Result: You will enter the "GAME ZONE" Function Language : English Time Plug & Play Blue Screen : Off Child Lock Game Zone (b) By the "Game Menu" Press the MENU button. Press v or w button to select "FUNCTION" and press button. Select Enter Exit 1 2 3 + or ­ + or ­ Game Zone Mode Contrast Volume Game Zone Function Press v or w button to select "GAME ZONE" and press button. [. . . ]