User manual SAMSUNG DP700A7D

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SAMSUNG DP700A7D. We hope that this SAMSUNG DP700A7D user guide will be useful to you.

Lastmanuals help download the user guide SAMSUNG DP700A7D.


SAMSUNG DP700A7D : Download the complete user guide (17751 Ko)

Manual abstract: user guide SAMSUNG DP700A7D

Detailed instructions for use are in the User's Guide.

[. . . ] FOR YOUR SAFETY WARNING If the information in this manual is not followed exactly, a fire or electrical shock may result causing property damage, personal injury or death. WARNING WARNING WARNING Before beginning the installation, switch power off at the service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. Failure to remove packaging materials could result in damage to the appliance. [. . . ] After installation, have the electrician show you where your main range disconnect is located. Check with your local utilities for electrical codes which apply in your area. Failure to wire your oven according to governing codes could result in a hazardous condition. If there are no local codes, your range must be wired and fused to meet the requirements of the National Electrical Code, ANSI/NFPA No. You can get a copy by writing: National Fire Protection Association Batterymarch Park Quincy, MA 02269 CAUTION 02 CONNECTING THE POWER (Fig. 2) Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range. When installing an electric range in new construction, follow Steps 2 and 3 for 4-wire connection. If the electrical service provided does not meet the above specifications, have a licensed electrician install an approved outlet. These cords may be provided with ring terminals on wire and a strain relief device. a range cord rated at 40 amps with 125/250 minimum volt range is required. A 50 amp range cord is not recommended but if used, it should be marked for use with nominal 13⁄8” diameter connection openings. INsTAllING ThE CoNDuIT Remove the conduit connection plate from the rear of the drawer body and rotate it as shown below. Then thread the conduit cord through the body of the strain relief and fasten the ring. Installing a 3-wire conduit • Aluminum building wire may be used but it must be rated for the correct amperage and voltage to make the connection. Insert the center bare wire (white/neutral) tip through the bottom center terminal block opening. On certain models, the wire will need to be inserted through the ground strap opening and then into the bottom center block opening. Insert the two side bare wire tips into the lower left and the lower right terminal block openings. Tighten the screws until the wire is firmly secured (35 to 50 inch-lbs. neutral terminal Black White Ground strap Red Black White Red Wire tips Connecting the power _9 Installation_XAC_DG68-00109F-01_EN+CFR. Indb 9 2012-02-21 �� 6:48:51 Installing a 4-wire conduit • Aluminum building wire may be used but it must be rated for the correct amperage and voltage to make the connection. Connect wires according to this Step 4 depending on the number of wires. Insert the ground bare wire tip between the range frame and the ground plate (removed earlier) and secure it in place with the ground screw (removed earlier). [. . . ] 5mm) is required between the range bottom and the kitchen floor. Locate the bracket using the template The Anti-Tip bracket is packaged with a template. The instructions include information necessary to complete the installation. Read and follow the instructions on the sheet (template) for range installation. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG DP700A7D

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG DP700A7D will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag