User manual SAMSUNG LN-T3253H

[. . . ] * W. LINK (WISELINK) This function enables you to view and play photo and music files from an external device. ( MENU Displays the main on-screen menu. a P/DOWN/LEFT/ U RIGHT/ENTER Press the Up/Down/Left/Right sections of the wheel button and Enter to select on-screen menu items and change menu values. You can navigate up and down the menu, switch channels and adjust the volume by turning the wheel button. [. . . ] Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN 2 [S-VIDEO] jack on the TV. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 2 [R-AUDIO-L] jacks on the TV. An S-Video cable may be included with a VCR. (If not, check your local electronics store. ) Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. English-5 Connecting a Digital Audio System TV Rear Panel Digital Audio System Connect an Optical Cable between the "DIGITAL AUDIO OUT (OPTICAL)" jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. When a Digital Audio System is connected to the "DIGITAL AUDIO OUT (OPTICAL)" jack: Decrease the volume of the TV and adjust the volume level with the system's volume control. Optical Cable (Not supplied) 5. 1CH audio is possible when the TV is connected to an external device supporting 5. 1CH. Each Digital Audio System has a different back panel configuration. When the receiver (home theater) is set to On, you can hear sound output from the TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5. 1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5. 1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not the TV. Connecting an Amplifier/DVD Home Theater TV Rear Panel Amplifier/DVD Home Theater Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and AUDIO IN [R-AUDIO-L] jacks on the Amplifier/DVD Home Theater. When an audio amplifier is connected to the "AUDIO OUT [R-AUDIO-L]" jack: Decrease the volume of the TV and adjust the volume level with the Amplifier's volume control. Each Amplifier/DVD Home Theater has a different back panel configuration. Audio Cable (Not supplied) When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable. English-6 Connecting a PC Using the D-Sub Cable Using the D-Sub Cable TV Rear Panel 2 Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer. · Cable: "Cable" antenna signal. · Auto: "Air" and "Cable" antenna signals. English- Setting the Channel List You can delete or add a channel to display the channels you want. Picture Mode · Dynamic: Selects the picture for high-definition in a bright room. · Standard: Selects the picture for the optimum display in a normal environment. · Movie: Selects the picture for viewing movies in a dark room. 2 3 4 Press the MENU button. Press the or button to select "Channel", then press the ENTER button. Press the or button to select "Channel List", then press the ENTER button. · Contrast: Adjusts the contrast level of the picture. · Brightness: Adjusts the brightness level of the picture. · Sharpness: Adjusts the edge definition of the picture. · Color: Adjusts color saturation of the picture. [. . . ] Make sure the broadcast you're receiving is High Definition (HD). HD channels sometimes broadcast Standard Definition (SD) programming, which can cause black bars. Set your cable/satellite box to stretch or widescreen mode to eliminate the bars. Make sure the Component cables are connected to the correct jacks. [. . . ]