User manual SAMSUNG LN19C350

[. . . ] !CC Controls the caption decoder. English- Connections Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI DVD Player or Cable Box/ Satellite receiver (Set-Top Box) TV Rear Panel Connect an HDMI Cable between the HDMI/DVI IN jack on the TV and the HDMI jack on the DVD Player or Cable Box/Satellite receiver (Set-Top Box). What is HDMI?· HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals using a single cable. HDMI Cable (Not supplied) · The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed. Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via DVI TV Rear Panel Connect a DVI to HDMI Cable or DVI-HDMI Adapter between the HDMI/DVI IN jack on the TV and the DVI jack on the DVD Player or Cable Box/Satellite receiver (Set-Top Box). Connect Audio Cables between the DVI IN [R-AUDIO-L] jack on the TV and the DVD Player or Cable Box/ Satellite receiver (Set-Top Box). DVD Player or Cable Box/ Satellite receiver (Set-Top Box) Audio Cable (Not supplied) DVI to HDMI Cable (Not supplied) Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable. [. . . ] Each Digital Audio System has a different back panel configuration. When the receiver (home theater) is set to On, you can hear sound output from the TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5. 1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5. 1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not the TV. Connecting an Amplifier/DVD Home Theater TV Rear Panel Amplifier/DVD Home Theater Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and AUDIO IN [R-AUDIO-L] jacks on the Amplifier/DVD Home Theater. When an audio amplifier is connected to the "AUDIO OUT [R-AUDIO-L]" jacks: Decrease the volume of the TV and adjust the volume level with the Amplifier's volume control. Each Amplifier/DVD Home Theater has a different back panel configuration. Audio Cable (Not supplied) When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable. English- Connecting a PC TV Rear Panel Using the D-Sub Cable PC Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer. D-Sub Cable (Not supplied) PC Audio Cable (Not supplied) TV Rear Panel Using the HDMI/DVI Cable Connect an HDMI/DVI cable between the HDMI/DVI IN jack on the TV and the PC output jack on your computer. Connect a 3. 5 mm Stereo mini-plug/ 2RCA Cable between the DVI IN [R-AUDIO-L] jack on the TV and the Audio Out jack of the sound card on your computer. PC HDMI/DVI Cable (Not supplied) Each PC has a different back panel configuration. When connecting a PC, match the color of the connection terminal to the cable. When using an HDMI/DVI cable connection, you must use the HDMI/DVI IN jack. 3. 5 mm Stereo mini-plug/2RCA Cable (Not supplied) English- Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. The TV begins memorizing all available stations. Press the ENTER button to select "All". Customizing the Picture Settings Your television has several setting options that allow you to control the picture quality. Press the , , or button to select a channel to delete, then press the ENTER button. Press the or button to select "Delete", then press the ENTER button to delete the channel. Press the , , or button to select a channel to add, then press the ENTER button. Press the or button to select "Add", then press the ENTER button to add the channel. Air DTV Air - Air3 Air Air Air Air DTV Air - Air List Mode Move Enter 3 To select the desired picture mode, follow the "Changing the Picture Standard" instructions numbers 1 and 2. Press the or button to select "Backlight", "Contrast", "Brightness", "Sharpness", "Color" or "Tint", then press the ENTER button. Press the or button to decrease or increase the value of a particular item. When you make changes to "Backlight", "Contrast", "Brightness", "Sharpness", "Color" or "Tint", the OSD will be adjusted accordingly. In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness". Settings can be adjusted and stored for each external device you have connected to an input of the TV. Channel List / All Air 9 Air 0 DTV Air 0- DTV Air Watch 0- Add Air 0-3 DTV Delete 0- DTV Air Favorite 0- DTV Air DTV Air 0-3 Add All DTV Air 0- DTV Air 0- DTV Air 0-3 Air DTV Air 3- DTV Air 3- DTV Air 3-3 DTV Air 3- Delete All Return / Changing the Picture Standard You can activate either Dynamic, Standard, Movie by making a selection from the menu. TV Mode Backlight Contrast Brightness Sharpness Color Tint G 0 More Move Picture : Standard 9 0 0 R 0 Return Press the MENU button to display the menu. Press the ENTER button, to select "Picture". Press the ENTER button to select "Mode". [. . . ] Adjust the horizontal and vertical position. The screen position must be adjusted on the output source (i. e. If "Just Scan" is selected with some external devices, the picture may appear distorted in the corner of the screen. This symptom is caused by the external devices, not TV. [. . . ]