User manual SAMSUNG MIM-D00

[. . . ] USER'S MANUAL MIM-D00 ENGLISH (Data Management Server) DMS K E C DB98-29777A(4) CHINESE Safety Precautions · Before using the DMS, read carefully these instructions. · After reading the instructions, keep this user's manual in a handy and safe place. If a user is changed, you must hand over the manuals. · Never attempt to install the air conditioning system or to move the DMS by yourself. WARNING o not attempt to install or repair this DMS by yourself. [. . . ] When pressing the `Delete Event' button from the after selecting a check box from the , the selected event is deleted. When pressing the `Save' button from the after setting all schedule information, the schedule information is saved to the DMS. When pressing the `Cancel' button from the , turn back to the schedule list screen. If you do not set the end date, the schedule does not have period limit and the end date will not appear on the screen. Temperature unit of the DMS will be set on either Fahrenheit or Celsius depending on the temperature unit used by the indoor unit. To edit existing schedule, click `Edit' from the Schedule screen. You may edit the existing schedule in the same way as adding a new schedule. 5 6 7 Note E-23 ENGLISH When pressing the `Select indoor unit' button from the , users can select the schedule indoor unit. Using the DMS through the Web (Continued) Setting and Viewing the Power Distribution Function Function Explanation Users can set, inquire, and edit the information of power distribution section. 4 for more information on the Power Distribution Function. Using the power Distribution Function 1 If clicking the `Edit' button from the , area is activated and users can set the desired section. Select one of possible settings which are 1 section, 2 sections, and 3 sections. 2 As shown in the above picture, only Section A is existed. It is from 00:00 to 24:00. E-24 3 Section A and Section B are existed in 2 Sections. Can inquire and set the border time between Section A and Section B. When pressing the `Save' button from the after editing the border time from the area , set time is adopted. If the border time between Section A and Section B is 08:00, Section A is 00:00~08:00 and Section B starts from 08:01. 4 3 Sections are classified into Section A, Section B, and Section C. The setting method is same as 2 sections' setting method. E-25 ENGLISH Using the DMS through the Web (Continued) Setting and Viewing the Power Distribution Environment Function Explanation Users can view or edit the connection between the indoor units and assigned watt-hour meter. DMS will distribute power based on the information which has been set up from this menu. 1 Check the address and the channel on the SIM transmitter that is connected to the watt-hour meter. SIM Transmitter with the address 0~7 will be displayed as 16~23 on DMS when tracking. Channel information of the terminal, with SIM transmitter and the watt-hour meter connections, displayed as follows ( Terminal block on the very left of the SIM transmitter is Terminal block 1): Terminal block 1 1 5 Terminal block 2 2 6 Terminal block 3 3 7 Terminal block 4 4 8 Top Bottom E-26 2 Check the indoor/outdoor units connected to the watt-hour meter. Check the SIM transmitter channel (watt-hour meter). If the indoor unit power is supplied from the outdoor unit, set the `Outdoor SIM ch. ' only. (`Outdoor SIM ch. ' signifies the watt-hour meter connected to the outdoor unit. ) If the indoor unit power is supplied separately, set both `Outdoor SIM ch. ' and the `Indoor SIM ch. '. (`Indoor SIM ch. ' signifies the watt-hour meter connected to the indoor unit. ) Set the indoor units that the power will be distributed. If you do not set up the indoor unit information, result of the power distribution will displayed as 0. [. . . ] - If Tracking has been run and there are communication error between centralized controller and the DMS, you cannot bring information on the indoor units connected to the Centralized controller. Do not run Tracking when the outdoor unit circuit breaker switch is off. - If Tracking has been run when the outdoor unit circuit breaker switch is off, DMS can not recognize the outdoor unit. - Since DMS cannot recognize the outdoor unit, all the indoor units connected to this outdoor unit can not be recognized as well and therefore controlling, monitoring and the power distribution is not available. [. . . ]