User manual SAMSUNG NP25FP0N2S

[. . . ] Notices No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, mechanical photocopying, recording or otherwise, without the prior written permission of the manufacturer. The information within this manual is subject to change without notice. The manufacturer shall not be held liable for technical or editorial errors or omissions contained in herein; nor for incidental or consequential damages resulting from the furnishing, performance or use of this material. Microsoft Windows is a registered trademark of the Microsoft Corporation. [. . . ] To turn off the computer, complete the following steps: 1. Click Turn Off to complete the shutdown sequence. If you need to restart your computer after software (re)installation or because it is not responding, select the Restart option. Power Off: If the system is not turned off, then press and hold the power button for over 4 seconds. See "Using Power Management Options" on page 69. Power Button Functions: The power button has several functions other than just turning on and off your computer, see "Using Power Management Options" on page 69. You can also perform a soft boot by saving your files and pressing <Ctrl+Alt+Del> to pop-up the "Windows Task Manager" window. You can perform a cold boot by pressing the power button for more than 4 seconds to turn the computer off, waiting more than five seconds, and then pressing the power button to turn the computer on. The system may perform some extra checks during the restart. 8 Users Manual Tips for Using Your Computer The following information helps you avoid potential problems as you use your computer: Do not try to disassemble your computer. Opening the system chassis voids your warranty. Only an authorised manufacturer service center can replace or add any parts inside the chassis. · Follow all the instructions and cautions in your computer user documentation. · The LCD has a polarized surface and can be damaged easily. To prevent damage, avoid touching the screen. · Use only approved AC adapters, auto adapters, memory modules and other options. · Because a notebook computer is small and has restricted air flow around components, it is more likely to overheat than a desktop computer. A fan inside your computer runs when needed to help eliminate heat. Make sure the fan vent on the left side of your computer is not blocked when you use the computer. Occasionally check the vents and remove any accumulated dust on the outside. · Avoid using or storing the computer in extremely hot or cold areas, such as a car on a hot day. Keep the computer away from heaters and out of direct sunlight. Exposure to excessive heat may damage computer components. If you have left your computer in a hot place, let it cool down slowly to room temperature (with the LCD panel open) before using it. · Do not remove the memory-module compartment door, or try to install a memory module when the computer is on. (For information on installing memory modules, see "Installing a Memory Module" on page 81. ) · Set up your computer work area to avoid physical strain. Sit with your back straight and supported by your chair. Adjust your chair or work table so that your arms and wrists can remain in a relaxed position, parallel with the floor. Avoid bending or twisting your wrists as you work. Your hands should "float" slightly above the keyboard. [. . . ] (D:\Application\WirelessLan\Setup. exe) Step 2. Click on the Wireless LAN Program ( ) icon on the taskbar. (Or click Start > All Programs > Samsung Wireless LAN > Client Manager. ) 2. Click Actions > Add/Edit Configuration Profile. [. . . ]