User manual SAMSUNG NP3530EC

[. . . ] 3 Checking before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Checking the name of the parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Basic function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If it occurs, re-clean and dry it in a well-ventilated area. 20 Australia_AQV30T@_IB&IM_33367A_E. indd 20 2012-6-29 9:20:02 Maintaining the air conditioner If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition. 1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours and cut-off the power supply. There may be internal damage if moisture is left in components. 2. Before using the air conditioner again, dry the inner components of the air conditioner again by running in Fan mode for 3 to 4 hours. This helps remove odors which may have generated from dampness. Periodical checks Refer to the following chart to maintain the air conditioner properly. Type Description Clean the Full HD filter (1) Indoor unit Clean the condensate drain pan (2) Thoroughly clean the heat exchanger (2) Clean the condensate drain pipe (2) Replace the remote controller batteries (1) Clean the heat exchanger on the outside of the unit (2) Clean the heat exchanger on the inside of the unit (2) Clean the electric components with jets of air (2) Outdoor unit Verify that all the electric components are firmly tightened (2) Clean the fan (2) Verify that all the fan assembly is firmly tightened (2) Clean the condensate drain pan (2)          Every 2 weeks Every 3 months Every 4 months Once a year     : This check mark requires checking the indoor/outdoor unit periodically. Follow the description to maintain the air conditioner properly. (1) The described operations should be performed more frequently if the area of installation is very dusty. (2) These operations must always be performed by qualified personnel. For more detailed information, see the installation part in the manual. 21 Australia_AQV30T@_IB&IM_33367A_E. indd 21 2012-6-29 9:20:03 Troubleshooting Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses. PROBLEM The air conditioner does not work at all. In these modes, desired temperature is set to auto and you cannot adjust the temperature. • Check if you have selected Auto/Dry/Turbo/ is set to Auto and you cannot adjust the fan speed. In these mode, fan speed The temperature adjustment is not working. Cool/Warm air does not come out of the air conditioner. Air flow adjustment is not working. Remote controller is not working. • Check if your batteries are depleted. • Make sure nothing is blocking your remote controller sensor. • Check that there are strong lighting apparatus near the air conditioner. Strong light which comes from fluorescent bulbs or neon signs may interrupt the electric waves. • Check if you press the Set button on the remote controller after you have set the time. • Press the Power button or disconnect the power plug/switch off the auxiliary power switch. If the indicator is still blinking, contact the service center. [. . . ] 1. Place the outdoor unit as indicated on the top of the unit to let the discharged air out properly. 2. Fix the outdoor unit in level to an appropriate support using anchor bolts. 3. If the outdoor unit is exposed to strong winds, install shield plates around the outdoor unit so that the fan can operate correctly. • Secure the rubber leg to help prevent the generation of noise and vibration. 'Y' mm 'X' mm Rubber leg Model 24 30 X 660 645 Y 340 340 Outdoor unit installed on the wall by rack • Ensure the wall will be able to suspend the weight of rack and outdoor unit; • Install the rack close to the column as much as possible; • Install proper grommet in order to help reduce noise and residual vibration transferred by outdoor unit towards wall. Designed to cut off residual vibration from outdoor unit to rack. [. . . ]