User manual SAMSUNG NZ64H57479K/EF

[. . . ] NZ64H57 Series Induction Hob user manual This manual is made with 100 % recycled paper. imagine the possibilities Thank you for purchasing this Samsung product. NZ64H57479K_EF_DG68-00547A-00_EN. indd 1 2014-04-07 5:52:55 contents USING THIS MANUAL 4 5 9 04 Important safety symbols and precautions SAFETY INSTRUCTIONS 05 Safety instructions DISPOSAL INSTRUCTIONS 09 Disposing of the packaging material 09 Proper disposal of your old appliance 09 Correct disposal of this product (Waste electrical & Electronic equipment) INSTALLING THE HOB 10 16 21 10 Safety instructions for the installer 11 Connecting to the mains power supply 13 Installing into the countertop PARTS AND FEATURES 16 Cooking zones 16 Control panel 17 Components 17 Induction heating 18 The key features of your appliance 19 Safety shutoff 20 Residual heat indicator 20 Temperature detection BEFORE YOU BEGIN 21 Initial cleaning English - 2 NZ64H57479K_EF_DG68-00547A-00_EN. indd 2 2014-04-07 5:52:55 HOB USE 21 21 Cookware for induction cooking zones 22 Suitability test 22 Size of pans 22 Operating noises 23 Using suitable cookware 24 Using the touch control sensors 24 Switching the appliance on 24 Select cooking zone and heat setting 25 Switching the appliance off 25 Switching a cooking zone off 25 Using the child safety lock 26 Timer 28 Using ready pan 29 Power boost control 30 Power management 30 Pause 31 Bridge control 31 Sound On/Off 32 Suggested settings for cooking specific foods CLEANING AND CARE 33 36 39 33 Hob 35 Hob frame (option) 35 To avoid damaging your appliance WARRANTY AND SERVICE 36 FAQs and troubleshooting 38 Service TECHNICAL DATA 39 Technical data 39 Cooking zones English - 3 NZ64H57479K_EF_DG68-00547A-00_EN. indd 3 2014-04-07 5:52:55 using this manual Please take the time to read this owner’s manual, paying particular attention to the safety information contained in the following section, before using your appliance. If transferring ownership of the appliance, please remember to pass the manual on to the new owner. IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS The following symbols are used in the text of this Owner’s Manual : Hazards or unsafe practices that may result in WARNING severe personal injury or death. CAUTION CAUTION Hazards or unsafe practices that may result in minor personal injury or property damage. To reduce the risk of fire, explosion, electric shock, or personal injury when using your hob, follow these basic safety precaution Do NOT attempt. [. . . ] However, it may still be possible to burn yourself. This can be avoided by always taking care when near the hob. TEMPERATURE DETECTION If for any reason the temperatures on any of the cooking zones were to exceed the safety levels, should this happen then the cooking zone will automatically reduce to a lower power level. When you have finished using the hob, the cooling fan will continue to run until the hob’s electronics has cooled down. And the cooling fan switched itself off depending upon the temperature of the electronics. English - 20 NZ64H57479K_EF_DG68-00547A-00_EN. indd 20 2014-04-07 5:53:13 before you begin INITIAL CLEANING Wipe the ceramic glass surface with a damp cloth and ceramic cooktop glass cleaner. Do not use caustic or abrasive cleaners. The surface could be damaged. WARNING 05 BEFORE YOU BEGIN & HOB USE hob use COOKWARE FOR INDUCTION COOKING ZONES The induction hob can only be turned on when cookware with a magnetic base is placed on one of the cooking zones. You can use the following suitable cookware. Cookware material Cookware material Steel, Enamelled steel Cast iron Stainless steel Aluminium, Copper, Brass Glass, Ceramic, Porcelain Suitable Yes Yes If appropriately labelled by the manufacturer No No Cookware for induction hob is labelled as suitable by the manufacturer. Certain cookware can make noise when being used on induction cooking zones. These noise are not a fault in the appliance and do not affect operation in any way. English - 21 NZ64H57479K_EF_DG68-00547A-00_EN. indd 21 2014-04-07 5:53:13 SUITABILITY TEST Cookware is suitable for induction cooking, if a magnet sticks to the bottom of the cookware and cookware is labelled as suitable by the cookware manufacturer. Induction cooking may not function properly on nonferrous cookware whose edge doesn’t stick to the magnet, or on nonferrous cookware whose bottom is iron-coated. SIZE OF PANS Induction cooking zones adapt automatically to the size of the bottom of the cookware up to a certain limit. However the magnetic part of the bottom of the cookware must have a minimum diameter depending upon the size of the cooking zone. Diameter of cooking zones 210 mm 145 mm Front or Rear Bridge Complete Bridge Minimum diameter of the bottom of the cookware 140 mm 100 mm 120 mm 180 mm (long side dimension), oval, fish kettle OPERATING NOISES If you can hear. • Cracking noise : cookware is made of different materials. • Whistling : you use more than two cooking zones and the cookware is made of different materials. • Humming : you use high power levels. • Clicking : electric switching occurs. • Hissing, Buzzing : the fan operates. The noise are normal and do not refer to any defects. English - 22 NZ64H57479K_EF_DG68-00547A-00_EN. indd 22 2014-04-07 5:53:13 USING SUITABLE COOKWARE Better pans produce better results. • You can recognise good pans by their bases. The base should be as thick and flat as possible. • When buying new pans, pay particular attention to the diameter of the base. Manufacturers often give only the diameter of the upper rim. [. . . ] • The cooking zone is switched on. • The cooking zones are set at the desired heat settings. What should I do if the cooking zones will not switch on? Check for the following possibilities: • A period of more than 20 seconds has elapsed between when the On/Off button was actuated and the desired cooking zone switches on (see the section “Switching the appliance on”). • The control panel is partially covered by a damp cloth or liquid. What should I do if the display except for , warmth indicator suddenly disappears? the residual This could be a result of one of two possibilities: • The On/Off sensor was accidentally actuated. • The control panel is partially covered by a damp cloth or liquid. English - 36 NZ64H57479K_EF_DG68-00547A-00_EN. indd 36 2014-04-07 5:53:24 What should I do if, after the cooking zones have been switched off, residual warmth is not indicated in the display? Check for the following possibility: • The cooking zone was only briefly used and therefore did not become hot enough. [. . . ]