User manual SAMSUNG P1053

[. . . ] · Make sure that water and electrical connections are made by qualified technicians, observing the manufacturer's instructions (see "Installing the Washing Machine" on page 2) and local safety regulations. · All packaging and shipping bolts must be removed before the appliance is used. Serious damage may occur if they are not removed. See "Removing the shipping bolts" on page 3. [. . . ] Add softener into compartment (if you desire). Add prewash detergent into compartment (if you desire). *Option Using Hot Water · The hot water valve is operated when you select a water temperature option above 60°C (60 °C or 95 °C). To add liquid detergent: 1. Remove the divider from its slot and insert it into compartment . 2. · Liquid detergents and Delay Start. (Please see "Delay Start" on page 12) With Delay Start use a dosage container for liquid detergents, e. ball, otherwise the liquid detergent will run slowly out of the soap dispenser and congeal. If a blockage and nasty smell occur, take the dosage container out of the drum at the end of the programme. With liquid detergents use the liquid insert in the soap dispenser. dosage or bags which are provided with the detergent. SAMSUNG Washing Machine Owner's Instructions 9 Washing a Load of Laundry Washing clothes using Fuzzy Logic Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Logic" automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed. To wash clothes using the Fuzzy Logic programs: 1. Rinse+ Your machine will run through an additional rinsing cycle. The washing duration will be prolonged accordingly. No spin The laundry remains in the drum without being spun after the final drain. Rinse Hold The laundry remains soaking in the final rinse water. Before the laundry can be unloaded, either "Drain" or the "Spin" program must be run. SAMSUNG Washing Machine Owner's Instructions 11 Washing a Load of Laundry Washing clothes manually You can wash clothes manually without using the Fuzzy Logic feature. Turn on the water at the water source sink. Press the (On/Off) button on the washing machine. (P1405J, P1205J, P1053, P805J) Note: You cannot open the door until you press (On/Off). Load the articles one at a time loosely into the drum, without overfilling. Put the detergent and, if necessary, softener or prewash detergent, in the appropriate compartments. Press the Temperature button to select the temperature (cold water, 30°C, 40°C, 60°C, 95°C) 9. [. . . ] (Make sure the holder of drain hose in the back is intact) · Check the end of the drain hose is submerged in water. Before contacting After-Sales service: 1. Try to remedy the problem (See "Troubleshooting" on this page). Restart the programme to see if the fault is repeated. [. . . ]