User manual SAMSUNG PN58C680

[. . . ] Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country CANADA Customer Care Center 1-800-SAMSUNG (726-7864) Web Site www. samsung. com Address Samsung Electronics Canada Inc. , Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660-2112 U. S. A 1-800-SAMSUNG (726-7864) www. samsung. com Plasma TV user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register Model _____________ Serial No. [. . . ] Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure. If you apply a security system other than the systems listed below, it will not work with the TV. If you select the Pure High-throughput (Greenfield) 802. 11N mode and set your AP's Security Encryption type to WEP, TKIP or TKIPAES (WPS2Mixed), your Samsung TV will not support the connection in compliance with new Wi-Fi certification specifications. If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode. If your router, modem, or device isn't certified, it may not connect to the TV via the "Samsung Wireless LAN Adapter. " Connection Methods: You can setup the wireless network connection four ways. PBC (WPS) Auto Setup (Using the Auto Network Search function) Manual Setup Ad-Hoc The Samsung Wireless LAN Adapter may not be recognized or work properly when connecting via a USB hub or via a USB extension cable other than the one available from Samsung. x 30 English Notice The picture may appear corrupted for some channels when the TV is connected to the Samsung Wireless LAN Adapter. If this occurs, connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference. To reconnect the Samsung Wireless LAN Adapter using the extension cable, follow these steps: 04 Advanced Features The Samsung Wireless LAN Adapter should be installed in an or interference-free area in order to avoid interference between the adapter and tuner. Connect the extension cable to the USB 2 (HDD) port. Connect the extension cable and Samsung Wireless LAN Adapter. Attach the Samsung Wireless LAN Adapter to the back of the TV near the top, using double-sided adhesive tape. Method: Connect via an extension cable Network Setup (PBC (WPS)) How to set up using PBC (WPS) If your router has a PBC (WPS) button, follow these steps: 1. Connect your TV to Samsung Wireless LAN Adapter as described in the previous section. Turn on your TV, press the MENU button on your remote, use the or button to select Setup, and then press the ENTERE button. Use the or button to select Network in the Setup menu, and then press the ENTERE button. On the Network screen, select Network Type. Press the PBC (WPS) button on your router within 2 minutes. Your TV player automatically acquires all the network setting values it needs and connects to your network. After the network connection is set up, press the RETURN button to exit the Network Setup screen. Network Setup (Auto) Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process. Wireless Network Setup Select a Network Internet Protocol Setup IP Address Subnet Mask Gateway DNS DNS Server : Not Selected : Auto : : : : Auto : PBC(WPS) U Move E Enter R Return English 31 Advanced Features How to set up automatically To set up the wireless connection automatically, follow these steps: 1. [. . . ] You have intermittent loss of audio or video. You see small particles when you look closely at the edge of the frame of the TV. POP (TV's internal banner ad) appears on the screen. Some of above pictures and functions are available at specific models only. English 51 Other Information Storage and Maintenance Do not spray water or a cleaning agent directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock. Clean the product with a soft cloth dapped in a small amount of water. License TheaterSound, SRS and the symbol are trademarks of SRS Labs, Inc. TheaterSound technology is incorporated under license from SRS Labs, Inc. Manufactured under license from Dolby Laboratories. [. . . ]