User manual SAMSUNG PS-50P96FD

[. . . ] PDP-TELEVISION (PLASMA DISPLAY PANEL) Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS Picture In Picture (PIP) Energy Saving TELETEXT (Option) SRS TruSurround XT Digital Natural Image engine Register your product at www. samsung. com/global/register Record your Model and Serial number here for future reference. _______________ User Instructions Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. [. . . ] Position: / / / You can select a position of the sub-picture. Programme You can select a channel of the sub-picture only when the Source is set to TV. Return Return Table of PIP Settings X - This PIP combination is not available. Sub Main Component HDMI PC TV analog Ext. 1 Ext. 2 AV S-Video Component HDMI PC TV digital O O O O O O O O O O O O X X X X X X X X X X X X X X X English - 28 Screen Burn Protection To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to programme the time between movement of the picture in minutes. 1 Press the MENU button to display the menu. 2 Press the or button to select Setup, then press the ENTER/OK button. 3 Press the or button to select Screen Burn Protection, then press the ENTER/OK button. 4 Select the required option by pressing the or button, then press the ENTER/OK button. Available options: Pixel Shift, All White, Signal Pattern, Side Gray 5 When you are satisfied with your setting, press the ENTER/OK button. Pixel Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after image on the screen. - Set Pixel Shift to On by pressing the or button, then press the ENTER/OK button. - Select the required option by pressing the or button, then press the ENTER/OK button. Available options: Horizontal Dot, Vertical Line, Time Optimum condition for pixel shift; TV Setup More Wall-Mount Adjustment Energy Saving : Off HDMI Black Level : Normal PIP Screen Burn Protection Move TV Enter Return Screen Burn Protection Pixel Shift All White Signal Pattern Side Gray : Dark Move TV Enter Pixel Shift Return Pixel Shift Horizontal Dot Vertical Line Time : On :2 :2 : 2 min PC Horizontal Dot Vertical Line Time (minute) 1 1 2 min TV/Ext/AV/S-Video/ Component/HDMI/DTV 2 2 2 min Move Enter Return The Pixel Shift value may differ depending on the monitor size (inches) and mode. All White: This function helps remove after images on the screen by changing the colour of pixels to white. Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time. Signal Pattern: This function helps remove after images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time. Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides. Dark: When you set the screen ratio to 4:3, it darkens the left and right sides. Light: When you set the screen ratio to 4:3, it brightens the left and right sides. To remove after images on the screen, use either All White or Signal Pattern function. Although both of the two functions remove after images on the screen, Signal Pattern is more effective. [. . . ] The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer. [. . . ]