User manual SAMSUNG PS50A467P1M

[. . . ] Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Thank you for purchasing this Samsung product. To receive more complete service, please register your product at Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". [. . . ] 1 2 3 To select the desired picture mode, follow the "Changing the Picture Standard" instructions numbers 1 and 2. Available options: Mode, Equalizer, SRS TruSurround XT, Audio Language, Audio Format, Audio Description, Auto Volume, TV Speaker, Sound Select, Sound Reset When you are satisfied with your setting, press the ENTER button. Mode: Standard/Music/Movie/Speech/Custom You can select the type of special sound effect to be used when watching a given broadcast. Equalizer: Mode/Balance/100Hz/300Hz/1kHz/3kHz/ 10kHz/Reset You can select a sound mode to suit your personal preferences. The television has several settings which allow you to control the sound quality. The adjusted values are stored according to the selected Sound mode. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. While viewing a Digital channel, this function can be selected. You can only select the language among the actual languages being broadcast. Audio Format: MPEG/Dolby Digital When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function. While viewing a Digital channel, this function can be selected. You can only select the language among the actual languages being broadcast. This function handles the Audio Stream for the Audio Description, when it is sent along with the Main audio from the broadcaster. While viewing a Digital channel, this function can be selected. Auto Volume: Off/On Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. TV Speaker: Off/On If you want to hear the sound through separate speakers, cancel the internal amplifier. The ­ +, MUTE buttons do not operate when the TV Speaker is set to Off. When TV Speaker is set to Off, you can operate only DTV : Audio Language, Audio Format, Audio Description, Sound Reset ATV : Sound Reset in Sound menu. Sound Reset: Reset All/Reset Sound Mode/Cancel You can restore the Sound settings to the factory defaults. - Reset All: All the sound values return to default settings. [. . . ] No picture or black and white picture Adjust the colour settings. check that the broadcast system selected is correct. Sound and picture interference Try to identify the electrical appliance that is affecting the television, then move it further away. Plug the television into a different main socket. [. . . ]