User manual SAMSUNG PS50B550T4W

[. . . ] To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Height The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there. Heat on the top of the PDP TV The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the product. [. . . ] message is displayed. Child Lock Fine Tune Channel : On Signal Information LNA : Off Signal Information Service ID Multiplex Network Bit error level Signal Strength : 0403 : (TSID 0004, ONID 20fa) : (ID 20fa) 0 82 OK Enter Return LNA (Low Noise Amplifier) This function is very useful in the situation that the TV is used in weak signal. LNA amplifies the TV signal in the weak signal area, a low-noise preamplifier boosts the incoming signal. 1 Press the MENU button to display the menu. Fine Tune 2 Press the or button to select Channel, then press the Signal Information ENTER button. Off LNA : Off 3 Press the or button to select LNA, then press the On ENTER button. 4 Select Off or On by pressing the or button, then press the ENTER button. 5 Press the EXIT button to exit. Channel English - 25 Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. 1 Press the MENU button to display the menu. 2 Press the ENTER button to select Picture. 3 Press the ENTER button again to select Mode. 4 Select the required mode by pressing the or button, then press the ENTER button. Colour Space : Native Black Adjust: Off/Low/Medium/High White Balance You can directly select the black level on the screen to Flesh Tone :0 adjust the screen depth. Edge Enhancement : On Dynamic Contrast: Off/Low/Medium/High Return You can adjust the screen contrast so that the optimal Enter Move contrast is provided. Gamma: -3 ~ +3 You can adjust the middle brightness of pictures. Press the or button until you reach the optimal setting. Colour Space : Auto/Native Colour space is a colour matrix composed of red, green and blue colours. Select your favourite colour space to experience the most natural colour. - Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on program sources. - Native: Native Colour Space offers deep and rich colour tone. - Custom: Adjusts the colour range to suit your preference. Customizing the Colour Space Colour: Red/Green/Blue/Yellow/Cyan/Magenta Adjusts the Colour range to suit your preference. Colour is available when Colour Space is set to Custom. [. . . ] No picture or black and white picture Adjust the colour settings. Check that the broadcast system selected is correct. Sound and picture interference Try to identify the electrical appliance that is affecting the television, then move it further away. Plug the television into a different main socket. [. . . ]