User manual SAMSUNG RF32FMQDBSR

[. . . ] Refrigerator user manual English imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www. Ï¿½ï¿½ 2:30 safety information SAFETY INFORMATION • Before operating the appliance, please read this manual thoroughly and retain it for your reference. €¢ Use this appliance only for its intended purpose, as described in this instruction manual. [. . . ] (170 cc) cup in about 10 seconds. Plastic Tubing (Assembled) Compression Fitting (Assembled) Molded end(Bulb) Compression nut (B) (1/4”) (Not supplied) Copper tubing or (Not supplied) Refrigerator Compression Nut (1/4”) (Assembled) COMPLETING THE SET UP Now that you have your new refrigerator installed in place, you are ready to set up and enjoy the features and functions of the appliance. By completing the following steps, your refrigerator should be fully operational. Make sure your refrigerator is in an appropriate location with reasonable clearance between it and the wall. Once the refrigerator is plugged in, make sure the interior light comes on when you open the doors. Set the Temperature control to the coldest temperature and wait for an hour. The freezer will get slightly chilled and the motor will run smoothly. Reset the refrigerator and freezer to the temperatures you want. After you plug the refrigerator in, it will take a few hours to reach the appropriate temperature. You can store food and drinks in the refrigerator after the temperature is sufficiently cool. If condensation or water drops appears on both sides of fridge door’s central part, turn the Energy Saver mode off after removing the condensation. (See the explanation on Energy Saver button in the USING THE CONTROL PANEL. ) 01 Ferrule (Not supplied) setting up Plastic tubing (B) (Not supplied) Household water supply line 1. Connect the household water line to the assembled compression fitting. -- If you are using copper tubing, slip the compression nut ( B ) (not supplied) and ferrule (not supplied) on the copper tubing (not supplied) as shown. -- If you are using plastic tubing ( B ), insert the molded end (Bulb) of the plastic tubing ( B ) into the compression fitting. €¢ Do not use without the molded end (Bulb) CAUTION of the plastic tubing ( B ). Tighten the compression nut ( B ) onto the compression fitting. Do not over-tighten the compression nut ( B ) . Turn water on and check for any leakage. If you find water drops or leakage in the connection areas, turn off the main water supply. Check the connections and, if necessary, tighten. [. . . ] In-home service will be provided during the warranty labor period subject to availability within the contiguous United States. in-home service is not available in all areas. To receive in-home service, the product must be unobstructed and accessible from floor level to service personnel. If during in-home service repair cannot be completed, it may be necessary to remove, repair and return the product. [. . . ]