User manual SAMSUNG S24C450B

[. . . ] 3-18 Using the Screen Adjustment Menu (OSD: On Screen Display) . 3-19 INSTALLING THE SOFTWARE Natural Color . 4-4 TROUBLESHOOTING Monitor Self-Diagnosis . 5-3 MORE INFORMATION Specifications . [. . . ] When OSD is not on the screen, push the button to adjust volume. Applicable to the models that have speakers only. If you press the [ ] button when there is no OSD, the input signal (Analog/Digital) is switched. When the input signal is switched by pressing [ ] button or the product is turned on, a message displaying the selected input signal appears at the top left of the screen. This function is not available for products with an Analog interface only. AUTO Press [AUTO] button to adjust the screen settings automatically This function is only available in Analog mode. If the resolution settings are changed in the Display Properties, the AUTO adjustment function is performed. Press this button to turn the product on or off Power LED This LED is turned on when the product works normally. For more information on the power-saving function, refer to the power saving function in More Information. When not using the product for a long time, unplugging the power cord is recommended to minimize power consumption. Using the product 3-18 3-19 Using the Screen Adjustment Menu (OSD: On Screen Display) The Screen Adjustment Menu (OSD: On Screen Display) Structure Top Menus PICTURE Brightness Coarse COLOR Color Gamma SIZE & POSITION H-Position V-Position Image Size Menu H-Position Menu V-Position Contrast Fine Red Green Blue Color Tone Sub Menus Sharpness Bright Angle Reset SETUP&RESET PC/AV Mode Menu Transparency INFORMATION Language Key Repeat Time Eco Saving Customized Key Off Timer On/Off Auto Source Off Timer Setting Display Time Monitor functions may vary according to models. Please refer to actual product. PICTURE Menu Controls the screen brightness. Fine If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then use the <Fine> function again. This function is only available in Analog mode. 3-19 Using the product COLOR Menu Description Expresses natural colors more clearly without changing the picture quality using proprietary digital picture quality improvement technology developed by Samsung Electronics. · <Off> - Turns the < Color> function off. Color> with the original pictures. Color · · · <Demo> - You can compare the pictures processed by < <Full> - Provides a clearer picture including areas corresponding to skin color. <Intelligent> - Improves the chroma of pictures except for areas corresponding to skin color. This menu is unavailable when < Angle> is set. You can adjust the red color value of pictures according to your preference. Red This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode. You can adjust the green color value of pictures according to your preference. Green This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode. You can adjust the blue color value of pictures according to your preference. Blue This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode. You can set the color temperature according to your preference. · · · · Color Tone · <Cool 2> - Sets the color temperature of the screen to very cool. <Cool 1>- Sets the color temperature of the screen to cool. [. . . ] Use the software utility installed on your computer to set up this feature. STATE Power Indicator Power Consumption NORMAL OPERATION On 34 watts POWER SAVING MODE Blinking Typical 0. 3 watts POWER OFF Off Typical 0. 3 watts If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected. More Information 6-26 6-27 Specifications MODEL NAME Size Panel Display area Pixel Pitch Synchronization Display Color Resolution Optimum resolution Maximum resolution Horizontal Vertical 24 inches (61 cm) 531. 36 mm (H) x 298. 89 mm (V) 0. 27675 mm (H) x 0. 27675 mm (V) 30 ~ 81 kHz 56 ~ 75 Hz 16. 7 M 1920x1080 @60 Hz 1920x1080 @60 Hz RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB Input Signal, Terminated 0. 7 Vp-p ± 5% separate H/V sync, Composite, SOG TTL level (V high 2. 0V, V low 0. 8V) Audio input : 1pin , PC audio signal input Audio signal Audio output : 1pin , earphone connector Speaker : 1Watt x 2 USB Hub USB up x 1 , USB 2. 0 down x 2 149MHz (Analog, Digital) This product supports 100-240 V. Since the standard voltage may differ from country to country, please check the label on the back of the product. 15pin-to-15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable 570 x 347 x 50 mm (22. 0 x 14. 7 x 2. 0 inches) (Without Stand) 570 x 387 x 201 mm (22. 4 x 15. 2 x 7. 9 inches) (With Stand) / 5. 2 kg (11. 5 lbs) 100 mm x 100 mm / 100 mm x 200 mm Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C) Humidity :10 % ~ 80 %, non-condensing Storage Temperature : -4°F ~ 140°F (-20°C ~ 60°C) Humidity : 5 % ~ 95 %, non-condensing -3°( ±2°) ~25° ( ±2°) S24A450S Maximum Pixel Clock Power Supply Signal Cable Dimensions (WxHxD) / Weight VESA Mounting Interface Environmental considerations Tilt Operating Storage Design and specifications are subject to change without prior notice. Class B (Information Communication equipment for residential use) This device is registered for EMC requirements for home use (Class B). [. . . ]