User manual SAMSUNG S27B970D

[. . . ] S27B970D User manual The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00252A-07 Table of Contents Chapter. 1 BEFORE USING THE PRODUCT 5 6 6 6 7 7 8 9 12 Copyright Securing the Installation Space Safety Precautions Symbols Cleaning Electricity and Safety Installation and Safety Operation and Safety Correct posture to use the product Chapter. 3 USING NCE (NATURAL COLOR EXPERT) 19 19 20 20 21 21 21 21 22 22 What is Monitor Calibration?Compatible Types of Calibrators What is NCE (Natural Color Expert)? [. . . ] The number and locations of ports can vary depending on the source device. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. Connecting the Power DC 14V 1. Connect the power cable to the DC power adapter. Next, connect the adapter to the product. 30 Connecting and Using a Source Device Connecting and Using a PC Connecting to a PC Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection Using an HDMI Cable (Digital Type) Connection Using an HDMI-DVI Cable HDMI IN (MHL) HDMI OUT 1. Connect the HDMI cable to the HDMI IN(MHL) port on the back of the product and the HDMI port on the PC. 2. Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC. 3. Press the [ HDMI IN (MHL) DVI OUT ] button on the product to change the input source to HDMI/MHL. NOTE •    Open the SETUP&RESET menu. Next, set PC/AV Mode to PC. 1. Connect the HDMI-DVI cable to the HDMI IN(MHL) port on the back of the product and the DVI port on the PC. 2. Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC. 3. Press the [ ] button on the product to change the input source to HDMI/MHL. NOTE •    Open the SETUP&RESET menu. •    Audio is not available if the source device is connected using an HDMI-DVI cable. 31 Connecting and Using a Source Device Connection using a Dual-link DVI cable (digital type) Connection Using the DP Cable DVI IN DVI OUT DP IN DP OUT 1. Connect the DVI cable to the DVI IN port on the back of the product and the DVI port on the PC. 2. Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC. 3. Press the [ ] button on the product to change the input source to DVI. 1. Connect the DP cable to the DP IN port on the back of the product and the DP port on the PC. 2. Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC. 3. Press [ ] to change the input source to DisplayPort. NOTE •    Open the SETUP&RESET menu. •    Audio is not available if the PC and product are connected via the DVI port. NOTE •    Open the SETUP&RESET menu. Next, set PC/AV Mode to PC. 32 Connecting and Using a Source Device Connecting the Product to a PC as a USB HUB NOTE The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source device directly to the product and control the device from the product, without having to connect the device to the PC. Driver Installation NOTE •    You can set the optimum resolution and frequency for this product by installing the corresponding drivers. [. . . ] Correct disposal of batteries in this product (Applicable in countries with separate collection systems) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. NOTE If customer requests a service in case the product has no defect, service fee may be charged. [. . . ]