User manual SAMSUNG SYNCMASTER S27B970D

[. . . ] This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. (Class l Equipment only. ) Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not bend the plug excessively and wire nor place heavy objects upon them, which could cause damage. [. . . ] If the program runs on Windows® XP, go to [Control Panel] in the [Start] menu. Click the "Add or Remove Programs" icon in Control Panel. In the "Add or Remove Programs" screen, scroll down to find "MagicTuneTM". Click the "Change/Remove" button to remove the program. Click "Yes" to begin the uninstall process. Wait until the "Uninstall Complete" dialog box appears. Visit the MagicTuneTM website for technical support for MagicTuneTM, FAQs (questions and answers) and software upgrades. Model Control Buttons [MENU / ] [ [] [AUTO] ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. These buttons allow you to adjust items in the menu. Press this button to activate a highlighted menu item. When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Direct Functions AUTO Menu Description When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. (Available in analog mode only) MENU , , , MENU Sharpness Changes the clearance of image. ( Not available in MagicColor mode of Full and Intelligent. ) MENU , , , MENU H-Position Changes the horizontal position of the monitor's entire display. (Available in analog mode only) MENU , , , MENU V-Position Changes the vertical position of the monitor's entire display. (Available in analog mode only) MENU , , , MENU OSD Menu Description You can choose one of nine languages. Play/Stop Language The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. MENU , , MENU H-Position You can change the horizontal position where the OSD menu appears on your monitor. MENU , , , MENU V-Position You can change the vertical position where the OSD menu appears on your monitor. MENU , , , MENU Change the transparency of the background of the OSD. Transparency MENU , , , MENU Display Time The menu will be automatically turned off if no adjustments are made for a certain time period. You can set the amount of time the menu will wait before it is turned off. - 5 sec, 10 sec, 20 sec, 200 sec MENU , , , MENU Setup Menu Description Select Auto Source for the monitor to automatically select the signal source. MENU , Play/Stop Auto Source , MENU Image Reset Image parameters are replaced with the factory default values. MENU , , , MENU Color Reset Color parameters are replaced with the factory default values. MENU , , , MENU RTA (Response Time Accelerator) A function that accelerates the response speed of the panel so as to provide a sharper and more natural video display. RTA RTA On : Activates the RTA function so that the panel operates at a higher response speed than its original speed. RTA Off : Deactivates the RTA function so that the panel operates at its original response speed. MENU , , , MENU LED Brightness Adjusts the brightness of the Power LED. MENU , , , MENU Information Menu Description Shows a video source, display mode on the OSD screen. MENU , Information Model Check List Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. Symptom No images on the screen. [. . . ] Unit : Hz Example : If the same light repeats itself 60 times per second, this is regarded as 60 Hz. Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit : kHz Interlace and Non-Interlace Methods Showing the horizontal lines of the screen from the top to the bottom sequentially is called the NonInterlace method while showing odd lines and then even lines in turn is called the Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a clear image. [. . . ]