User manual SAMSUNG SYNCMASTER S27C230B

[. . . ] An improper ground may cause electric shock or equipment damage. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. This may cause an electric shock or fire. Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time. Failure to do so may cause an electric shock or fire. Do not connect too many extension cords or plugs to an outlet. This may cause a fire. Safety Instructions : Installation Do not cover the vents on the monitor cabinet. [. . . ] 1) Click Start --> Settings --> Control Panel --> Display --> Settings --> Advanced --> Adapter --> Update Driver --> Next --> Display a list of the known drivers for this device so that I can choose a specific driver --> Next -> Have Disk (Insert Video Card Driver diskette) -> OK -> Next -> Next -> Finish. 2) In case you have Adapter Driver Setup file on your computer: Run Setup. exe or Install. exe, which is found in the Adapter Driver Setup file. 4. Maintaining the Monitor Case Clean with a soft cloth after disconnecting the power cord. Do not use benzene, thinner or other flammable substances, or a wet cloth. We recommend a Samsung cleansing agent is used to prevent damage to the screen. Maintaining the Flat Panel Display Screen Clean with a soft cloth (cotton flannel) smoothly. (They may cause flaws or deformation of the screen surface. ) The user will be required to pay costs and related expenses for repair of damages caused by him/her. 5. Symptoms and Recommended Actions A monitor recreates visual signals received from the PC. Therefore, if there is trouble with the PC or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact a service center or your dealer. Check if the power cord and the cable are properly connected to the computer. Check the maximum resolution and the frequency of the video adaptor. Compare these values with the data in the Preset Timing Modes Chart. Check if the signal cable is securely connected. Connect it again securely. (Refer to Connecting to a Computer) Run Frequency Coarse and Fine tuning. Turn on again after removing all accessories (video extension cable, etc. ) Set resolution and frequency to the recommended ranges. 15 inch model (1024 x 768 @ 60Hz), 17 inch model (1280 x 1024 @ 60Hz) "Video mode not supported" message Picture rolls vertically. Image is not clear. Picture is blurred. Troubleshooting - Problems and Solutions Problems Picture image is unstable and vibrates. The image is too light or too dark Solutions Check if the resolution and frequency set for the computer video card falls in the range supported by the monitor. If not, reset them referring to the current Information under the monitor menu and Preset Timing Modes. Adjust the Brightness and Contrast. (Refer to the Brightness, Contrast) Adjust color using User Mode under OSD Color Adjustment menu. Screen color is inconsistent. Color image is distorted with dark shadows. [. . . ] This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the printed or scanned images. For more information, refer to Help (F1) in the software program. How to install the Natural Color software Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial screen of the program installation will be executed. [. . . ]