User manual SAMSUNG SC20F70HC

[. . . ] SC20F70 Series SC07F70 Series Vacuum Cleaner user manual ✻ Before operating this unit, please read the instructions carefully. ✻ For indoor use only. English Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www. samsung. com/register CLEAN THE DUST BIN WITH WATER 1 2 3 4 Take the dust bin out by lifing the handle Push the button aside. Turn the grille and take out it. Push the button. 5 6 7 Separate the dust bin from body. Clean the dust bin and body with water. Leave the dust bin and body in the shade until completely dry. ACCESSORY (OPTION) • Pull out the button, to use the dusting brush. • To use the crevice tool, push the accessory on to the end of the hose handle in the opposite direction. safety information SAFETY INFORMATION WARNING • Before operating the appliance, please read this manual thoroughly and retain it for your reference. • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this manual. WARNING CAUTION/WARNING SYMBOLS USED WARNING Indicates that a danger of death or serious injury exists. [. . . ] Don’t cover the handle transmitter when you use a handle control button. -/+ sender Handle Control The cleaner is controlled by radio frequency signals. HOSE (SC07F70H Series) 1. ON/OFF [   ] Button -- Press the ON/OFF button to operate the vacuum cleaner. 2. [(-)], [(+)] Button -- Press the (+) button to increase the vacuum's suction power. Press the (-) button to decrease the vacuum's suction power. Don’t cover the handle transmitter when you use a handle control button. If no button is pressed for 30 minutes while cleaning, the safety device is activated and the power is cut off. In this case, press the [Power] button on the main unit or unplug and then plug the power cord in again. sender + Handle Control The cleaner is controlled by radio frequency signals. HOSE (SC20F70U Series) 1. ON/OFF [   ] Button -- Press the [   ] button to operate the vacuum cleaner. 2. [SUCTION (-/+)] Button -- Press the [SUCTION (-/+)] button to increase or decrease the suction power. Each time you press the button, you gradually increase the suction power. After the suction power reaches its maximum, the next time you press the button, you return the suction power to its minimum. 3. [BRUSH ON/OFF] Button -- Press the [BRUSH ON/OFF] button to operate the UV Brush. Press again to stop the UV Brush. sender Handle Control The cleaner is controlled by radio frequency signals. Don’t cover the handle transmitter when you use a handle control button. If no button is pressed for 30 minutes while cleaning, the safety device is activated and the power is cut off. In this case, press the [Power] button on the main unit or unplug and then plug the power cord in again. 10_ operating the cleaner operating the cleaner Change the battery • When the vacuum cleaner does not work, replace the batteries. If the problem persists, please contact our authorized dealer. Never disassemble or recharge the batteries. Never heat up the batteries or throw them into a fire. Dispose of the batteries property. operating the BATTERY TYPE : AAA Size BODY Press the power ON/OFF button repeatedly to start and to stop the vacuum cleaner. (OFF → ON → OFF) If the remote handle control is not working, the cleaner can be operated using the ON/OFF button on the body of the machine. 1 cleaner 2   The ON/OFF button toogles the vacuum between the on and off states. The filter light is illuminated when the dust pack requires checking or emptying. Before performing this operation, make sure that there is no blockage in the tube, hose or brush. operating the cleaner _11 USING THE UV BRUSH (SC20F70U SERIES) 1. Insert the brush into the hose handle. • Insert the UV brush securely into the hose handle until you hear a “clicking” sound. 2. Press the [BRUSH ON/OFF] button to start cleaning. • Press the [BRUSH ON/OFF] button and choose the appropriate suction strength for the cleaner. • It is advisable to select the (Max) suction strength setting. [. . . ] 1. To remove dust from the dust bin, move the [Dust Removal] button to the “Open” position. -- While the cleaner is operating (suction), use the [Dust Removal] button for this purpose. 03 tools and 2. When done, move the [Dust Removal] button to the “Close” position. -- When the [Dust Removal] button is in the “Open” position, the suction power of the cleaner is reduced. [. . . ]