User manual SAMSUNG SC7910

[. . . ] Disconnect the plug from the mains before cleaning or maintenance of the vacuum cleaner. All service and repairs must be carried out by an authorised Electrolux service centre. Always keep the vacuum cleaner in a dry place. Insert the hose until the catches click to engage (press the catches to release the hose). [. . . ] 5 Some vacuum cleaners, depending on the model, are equipped with an automatic cable winder (autoreverse). pull out the cable and plug in the vacuum. Move the control backwards in order to wind the cable in and out as required. Move it forwards to lock the cable once it is at the required length. 7 If you have a vacuum cleaner with remote control* the machine is started by gently pressing the auto or min button. in the auto-position the suction power is automatically adjusted depending on the surface. Increase the suction power to maximum power by pressing in the auto button for three seconds or more. Turn off the vacuum cleaner by pressing the off button. When the machine is started, all the check lights initially light up. They will then all go out with the exception of Optimum. If your Oxygen+ is equipped with remote control*, the min ­ auto ­ max lights flash as soon as you plug it in. 1b Replace the filter for every 5th s-bag® or when the indicator lamp is illuminated 2 Remove the hose and open the lid. 3 Remove the dustbag holder 6 Open the filter holder for the motor filter and fold it forward. 7 Carefully remove the dirty filter and replace it with a new one. 8 Press the filter holder back until it clicks into place. 9 Replace the dustbag holder (including s-bag®) and close the cover. A safety catch prevents the filter holder from closing without the motor filter fitted. The vacuum cleaner automatically stops if there is a blockage in the nozzle, tubes or hose or if the filter or dustbag become blocked. Disconnect from the mains and allow the vacuum cleaner to cool down for 20-30 minutes. You can also sometimes clean the hose by "massaging" it. You should, however, be careful if there is a risk that, for example, glass or nails have become imbedded in the hose. NB: Note: The warranty does not cover any damage to the hose caused by cleaning it. [. . . ] 4a Remove the wheels and axles by pulling them right out. Remove dust-balls, hair or anything else that may have got stuck. Use the crevice nozzle to clean the wheel axles. reassemble the wheels by pressing them tightly together. [. . . ]