User manual SAMSUNG NP305E5A-S05

[. . . ] · (b) you bring the unit to a repair centre and there is no defect in the product (i. e. where you have failed to read this user manual). The amount of such administration charge will be advised to you before any work or home visit is carried out. Cleaning the Monitor Cleaning The panel and exterior of the cutting-edge monitor scratch easily and require careful attention. Clean the monitor according to the following steps. [. . . ] Lamp Control Lamp Control is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a specified time. If Manual Lamp Control is adjusted, Auto Lamp Control will automatically switch to Off. Manually adjust the backlight for the selected display. If Auto Lamp Control is adjusted, Manual Lamp Control will automatically switch to Off. z Ambient Light: Ambient Light detects ambient light intensity and automatically adjusts the screen brightness of all the LFDs in the same serial chain. Tool Settings 1 2 3 4 1 Security Panel Control Turn on or off the screen of a display device. Remote Control Enable or disable the remote control. 2 Reset Reset Picture Reset the screen settings. Reset All Reset the screen, sound and system settings at the same time. 3 Edit Column Select the items you want to display in the list of sets. 4 Information View the program information. Other Functions Resizing a Window Place the mouse pointer on a corner of the program window. Move the arrow to customize the size of the program window. Group Management Creating Groups Create groups and manage the list of sets on a group basis. Duplicate group names cannot be used. 1 2 Right-click and select Group>Edit in the display device list section on the left side of the program window. In the Edit Group window displayed, click Add on the sub level or Add on the same level. z Add on the sub level: Create a sub-group under the selected group. z Add on the same level: Create a group on the same level as the selected group. The Add on the same level button is enabled only if at least one group is created. 3 1 2 Enter the group name. Deleting Groups Select a group name, and click Edit. In the Edit Group window displayed, click Delete. 3 1 2 Click Yes. The group will be deleted. Renaming Groups Select a group name, and click Edit. In the Edit Group window displayed, click Rename. 3 If a cursor appears in the old group name, enter a new group name. Schedule Management Creating Schedules Create and register a schedule on a group basis. 1 Click All Schedule List in the schedule section on the left side of the program window. PC DVI AV Component HDMI1 - This is deactivated when a TV tuner box is installed. HDMI2 - This is deactivated when a network box is installed. DisplayPort MagicInfo - Activated when a network box is connected. TV - Activated when a TV tuner box is connected. Note The RGB/COMPONENT IN port is compatible with RGB (PC) and Component signals. Adjusting the LCD Display However, the picture may display abnormally if the connected external input signal is different from the selected video signal. PIP Note The PIP function is not available when Video Wall is On. When external AV devices such as VCRs or DVDs are connected to the LCD Display , PIP allows you to watch video from those devices in a small window super-imposed on the PC Video signal. (Off / On) Note · · PIP turns off when the LCD Display is switched to an external source. If you select , , in Size, Position and Transparency will not be activated. PIP Turns the PIP Screen Off/On. · · Off On Source Note PIP is disabled if the primary screen does not receive a signal. A TV tuner box (sold separately) must be connected to use the TV. (US Only) Selects the input source for the PIP. [. . . ] Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-Interlace method while showing odd lines and then even lines in turn is called the Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a clear image. [. . . ]