User manual SAMSUNG HT-D5300

[. . . ] HT-D5300 5. 1CH Blu-rayTM Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register HT-D5300_XAA_0125. indd 1 2011-01-25 12:01:13 Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within Triangle Is awarning sign alerting you of dangerous voltage Inside the product. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The explanation point within the triangle is a warning sign alerting you of important instructions accompanying the product. WARNING · To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] Make sure the disc tray is empty, and then insert the USB flash drive into the USB port of the product. In the product's menu, go to Settings > Support > Software Upgrade. Select By USB. The four methods are explained below. By Internet To upgrade by Internet, follow these steps: 1. Select By Internet, and then press the ENTER button. The Connecting to Server message appears. If there is a download available, the Download pop-up appears with a progress bar and the download starts. When the download is complete, the Upgrade Query window appears with three choices: Upgrade Now, Upgrade Later, or Don't Upgrade. If you select Upgrade Now, the product upgrades the software, turns off, and then turns on automatically. If you do not make a selection in one minute or select Upgrade Later, the product stores the new upgrade software. You can upgrade the software later using the By Downloaded function. If you select Don't Upgrade, the product cancels the upgrade. NOTE The disc tray must be empty when you upgrade the software using the USB Host jack. When the software upgrade is done, check the software details in the software Upgrade menu. Do not turn off the product during the software upgrade. It may cause the product to malfunction. Software upgrades using the USB Host jack must be performed with a USB memory flash stick only. 44 English 2011-01-25 12:02:05 HT-D5300_XAA_0125. indd 44 03 By Disc To upgrade by Disc, follow these steps: 1. Download the latest disc software upgrade zip archive to your computer. You should have a single folder with the same name as the zip file. Finalize the disc before you remove it from your computer. In the product's menu, go to Settings > Support > Software upgrade. Select By Disc. NOTE Setup When the system upgrade is done, check the software details in the software Upgrade menu. Do not turn off the product during the software Upgrade. It may cause the product to malfunction. To use the By Downloaded function, your product must be connected to the Internet. Download in Standby Mode You can set the Download in Standby Mode function so that the product downloads new upgrade software when it is in Standby mode. In Standby mode, the product is off, but its Internet connection is active. This allows the product to download upgrade software automatically, when you are not using it. To set Download in Standby Mode, follow these steps: 1. Press the buttons to select Download in Standby Mode, and then press the ENTER button. [. . . ] To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. [. . . ]